Author Topic: Heads up! Arnold/Hornby BOGO sale  (Read 22030 times)

0 Members and 1 Guest are viewing this topic.

AlbertSpor

  • Crew
  • *
  • Posts: 92
  • Gender: Male
  • Respect: +14
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #45 on: December 12, 2016, 09:50:35 AM »
0
Thanks Ed.
 I ordered 2 U boats Thursday, and even with the snow shutting down Portland and Seattle, they were here on Saturday.

Albert Spor
Albert Spor

Ed Kapuscinski

  • Global Moderator
  • Crew
  • *
  • Posts: 26169
  • Head Kino
  • Respect: +11710
    • Conrail 1285
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #46 on: December 12, 2016, 12:02:53 PM »
0
I'm going to go slightly off topic... But I was curious what would it take to modify the SW1 to have the four window cab like what's on Amtrak 737?
http://rrpicturearchives.net/showPicture.aspx?id=3165451

I just went half on a pair, and picked up Amtrak 740, so its only fair it gets repainted into Amtrak in my book...
Though am thinking I will pick up another pair soon....

I'd start with an MTL SW1500 cab side, and adjust as necessary.

wcfn100

  • Crew
  • *
  • Posts: 8956
  • Respect: +1392
    • Chicago Great Western Modeler
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #47 on: December 12, 2016, 12:06:52 PM »
0
I'm going to go slightly off topic... But I was curious what would it take to modify the SW1 to have the four window cab like what's on Amtrak 737?
http://rrpicturearchives.net/showPicture.aspx?id=3165451

Isn't that window pattern the same as an MP15dc?  You could cut and splice those from the Atlas model?



Jason
« Last Edit: December 12, 2016, 12:10:30 PM by wcfn100 »

Ed Kapuscinski

  • Global Moderator
  • Crew
  • *
  • Posts: 26169
  • Head Kino
  • Respect: +11710
    • Conrail 1285
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #48 on: December 12, 2016, 12:13:41 PM »
0
Isn't that window pattern the same as an MP15dc?  You could cut and splice those from the Atlas model?
Jason

Lol, oh yeah, or that!

nscaler711

  • Crew
  • *
  • Posts: 926
  • Respect: +271
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #49 on: December 12, 2016, 12:49:15 PM »
0
Thanks Ed, Jason. I was thinking about that, but not sure how id tackle it... That and I have yet to see how the SW1s come apart...
I do have a spare SW1500 shell laying around. Somewhere.  :? :facepalm:

I'm just worried about seams and what not... From what I have seen from alot of people here the biggest issue is most putty dries smaller than the area It's filling. I'm not complaining, just taking notes of other peoples issues like on the CR OCS E unit build, I think specifically the portholes it was mentioned.

Anyway, any ideas? Or is there something easier like a brass layover type thing? Or perhaps drilling & cutting?

peteski

  • Crew
  • *
  • Posts: 35436
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6696
    • Coming (not so) soon...
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #50 on: December 12, 2016, 04:28:14 PM »
+1
Thanks Ed, Jason. I was thinking about that, but not sure how id tackle it... That and I have yet to see how the SW1s come apart...

Um, you must  have missed the deep-dive review - more than you ever wanted to know about this little switcher.  The shell is covered in the 2nd post in the thread.  :D
. . . 42 . . .

ryan_wilkerson

  • Crew
  • *
  • Posts: 1100
  • Respect: +209
    • ShastaRails.com
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #51 on: December 12, 2016, 07:19:41 PM »
0
Peteski, thanks for the link to that detailed writeup and the coupler conversion doc too.
I just installed a Zimo MX622N into my new SW1 today and it creeps slower than any locomotive I own. So great to spend 2 minutes on the DCC conversion! Hopefully more companies design like this in the future.

peteski

  • Crew
  • *
  • Posts: 35436
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6696
    • Coming (not so) soon...
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #52 on: December 12, 2016, 07:27:05 PM »
0
Peteski, thanks for the link to that detailed writeup and the coupler conversion doc too.
I just installed a Zimo MX622N into my new SW1 today and it creeps slower than any locomotive I own. So great to spend 2 minutes on the DCC conversion! Hopefully more companies design like this in the future.

You're welcome Ryan!  As far as the 6-pin DCC socket goes, that has pretty much has been the standard for over a decade  in most N scale locos from European manufacturers (and Arnold is a European company).  Even Kato uses that socket on most of the models they were subcontracted to build for Lemke (German company). It is also good to see that more American-based manufacturers (like FVM) seem to be adapting this universal plug-n-play solution.

I agree that ZIMO decoders do offer the best coreless motor control of all the decoders I have tried.
. . . 42 . . .

CBQ Fan

  • Crew
  • *
  • Posts: 3538
  • Respect: +391
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #53 on: December 12, 2016, 07:42:04 PM »
0
So what is the take on this pricing?  Definitely not the norm.  Clearing stock to exit N scale, clearing stock for year end cash manuever to make the books look better?
Brian

Way of the Zephyr

peteski

  • Crew
  • *
  • Posts: 35436
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6696
    • Coming (not so) soon...
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #54 on: December 12, 2016, 09:07:05 PM »
0
So what is the take on this pricing?  Definitely not the norm.  Clearing stock to exit N scale, clearing stock for year end cash manuever to make the books look better?

I recall reading earlier in the year that Hornby (parent of Arnold) was in financial trouble. Not sure of this is related to that or not.
. . . 42 . . .

wazzou

  • Crew
  • *
  • Posts: 6812
  • #GoCougs
  • Respect: +1737
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #55 on: December 12, 2016, 09:11:11 PM »
0
I had the NP U-28C I ordered arrive DOA, a doorstop. 
I called Hornby this morning and at lunchtime drove 15 minutes to the warehouse and made an exchange.
The new one runs perfectly.
Bryan

Member of NPRHA, Modeling Committee Member
http://www.nprha.org/
Member of MRHA


Cajonpassfan

  • Crew
  • *
  • Posts: 5410
  • Respect: +1982
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #56 on: December 13, 2016, 12:14:55 AM »
0
Get 2 and then sell one  here on TRW (for $50).   Or fins someone who will go halves with you.  :)  This sale is too good to miss!

I'll go for one SW if anyone wants to split an order...black preferred, like PC.
Otto K.

sd75i

  • Crew
  • *
  • Posts: 290
  • Respect: +16
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #57 on: December 13, 2016, 09:07:11 AM »
0
  In the short time I've been in N Scale (25+), I don't recall EVER seeing a buy one get 1 free!  Got 2 BN sw1's.  Thanks Rapido for sale and Ed for info!

  Dave T

JMaurer1

  • Crew
  • *
  • Posts: 1188
  • Gender: Male
  • Respect: +307
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #58 on: December 13, 2016, 01:40:00 PM »
0
Thanks for the heads up. I missed a sale Amazon had on the SW-1's and I've been watching the prices on them so I could pick one up. I actually was checking the Amazon price when I saw this thread (suddenly Amazon had dropped the price to $89 each on two road names). Ordered two Amtrak units (at least one to become SP tigerstripes). I may have one for sale soon...
Sacramento Valley NRail and NTrak
We're always looking for new members

Ed Kapuscinski

  • Global Moderator
  • Crew
  • *
  • Posts: 26169
  • Head Kino
  • Respect: +11710
    • Conrail 1285
Re: Heads up! Arnold/Hornby BOGO sale
« Reply #59 on: December 13, 2016, 01:52:07 PM »
0
I think mine are being delivered by mule. I ordered them when I posted this, and they're sadly not due until Friday.

I'm really looking forward to them. I even stopped and got a new decoder so they'll both be ready.