For those following along at home, you may remember that
@craigolio1 and I are participating in a dueling business car build, and we are trying to out-do one another on all sorts of fronts. We both got side tracked with other projects...

... but, it's time for a quick update on the Burrard build.
One of Craig's superpowers is the witchcraft he is capable of with LEDs, as demonstrated in his last 93 update, and more recently in the BCH caboose thread:
https://www.therailwire.net/forum/index.php?topic=38361.msg653135#msg653135As it turns out, part of the reason why that BCH caboose is now getting ridiculously tiny blinking construction markers is because of Burrard. You see, when 93 was getting its marker light housings built into the roof, I was trying to figure out how to go about making markers for my car. Burrard never got those unsightly housings, but rather uses proper marker lamps even to this day (as all respectable tail end cars do). The availability of an original CNR marker lamp at work and the arrival of my Photon S last fall provided a somewhat clearer path forward. I quickly drew up a 3D model and had test prints in no time.
[ Guests cannot view attachments ]
These marker were the first prototype. They were as accurate as I could make them to an authentic CNR marker lamp, though the thin mounting bracket was a concern. Revision 2 has a larger cylindrical sprue to allow for easy mounting on the car. But this was just the beginning ... I wanted these lamps to be LIT.
Cue Craig and his LED voodoo. We were talking about the ability of casting these markers in clear epoxy and embedding LEDs within using his ditch light housing technique. The wires would be routed through the mounting sprue during casting, and would actually act to reinforce that mount. The lenses could then be painted in appropriate clear colours, and the rest of the marker painted silver and then black to allow light to only escape from the lenses. I was sold. Then he asked how small the Photon could print, which led to...
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
Those BCH markers are TINY... 1.25mm across, 1.9mm high, and the globe is only 0.3mm thick. The mounting sprue is visible on the newer CNR marker lamp. As is, this current design will be used for dummy (unlit) markers on many of my passenger trains and cabooses for typical day time running.
0201 nano LEDs were fit inside the base of the CNR markers aiming upwards and cast in clear epoxy in a mould made from the 3D printed parts.
[ Guests cannot view attachments ]
And now, they actually light up!
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
I need to paint these appropriately and find the right dropping resistor to get them to just barely glow softly, but I am really stoked.
[ Guests cannot view attachments ]
Just for fun, here are some unpainted dummy markers fit up on Burrard, where the lit markers will eventually get installed in their place. Finally, some progress on the car! The markers, along with all interior lighting, will be powered by
@peteski's patented flicker free circuit.
I think the next major hurdle to tackle will be printing the back porch railings, then finer details in the bedrooms and lounge area. Didn't someone mention businessmen and scotch?
[ Guests cannot view attachments ]