0 Members and 1 Guest are viewing this topic.
Ed, you have some options. I never cared for how poorly PollyScale Reefer White covered dark items like handrails, so some time ago I started using white arylic craft paint. The deal there is to Dullcote twice; once to before painting to give it tooth and once after to keep it sealed.
You can still mix custom mixes and document using other paint types. To be fair I always felt true Conrail blue falls between Pollyscale's D&H Avon and Conrail blue. You'd be surprised at how close you can get with a good selection of craft blues.
Back in the late 70's...the dark ages of modeling, a number of us got together and worked up paint chips and had quart cans of enamel mililtary colors mixed up at a local auto paint store. We also had primer and gloss and flat coat done as well...then we dispensed the paint as needed. You may chuckle, but I had my share of that paint until the late 90's and was pretty prolific building 1/72 scale ac...No problem with color matching or consistancy in my collection.
There was a rumor that Accu-paint was specially mixed auto paint, especially mixed to the owner's colors by a store that supplied body shops, something any decent sized town has. Maybe somebody will again try this route?
With regard to Scalecoat, I see that Scalecoat I is for metals and wood, while Scalecoat II is for plastics. If you have a loco with plastic shell, brass handrails, and other metal appliances, will Scalecoat II over the whole model be fine?
The rumor I heard was that Accupaint was a custom color matched ink. It as delivered in large quantities to Geroge Bishop who then poured it into 1 oz. bottles. Not sure what kind of ink. Maybe ink for Tampo printing? Inks have different chemical composition from paints and can be made very opaque, even when applied in a very thin film. To me it seems feasible that it was ink. Accupaint went on in very thin layers, dried to a very dueable finish and was quite opaque.
...These are sprayed in a large industrial spray room (basically a walk-in spray booth) with very large paint guns. Trying to push automotive paint through a hobby airbrush with a small compressor is a "challenge" at best.
Vallejo uses a fine resin for the pigments, and that makes the paint really strong. The thing is that you must clean the air brush tip evry now and then.
Trying to push automotive paint through a hobby airbrush with a small compressor is a "challenge" at best.
It's not quite that bad. Many automotive subject modelers (including me) often paint their models using automotive enamels and lacquers shot through an airbrush. Thinned of course. Thare are actually few companies out there catering to car modelers which will custom mix any automotive color using automotive paints. I also airbrush my models wit thinned nail polish. Normally nail polish is quite thick as it is designed for paintbrush application.
ehehMe and my bad english. We must clean the airbrush every 20 or 30 minutes of painting. I clean my airbrush on every paint session with the cleaning liquid from Vallejo: a dilluted solution for changing colors and full strenght for finishing after painting is done for that day.Other than this, painting with Vallejo is a great experience. Cheers