Author Topic: Weekend Update 5/19/13  (Read 13928 times)

0 Members and 1 Guest are viewing this topic.

craigolio1

  • Crew
  • *
  • Posts: 2739
  • Respect: +2388
Re: Weekend Update 5/19/13
« Reply #30 on: May 19, 2013, 04:56:38 PM »
0
Nice steam genny!  I want to build one just like that for my model of the Canadian (Jason?!?).  Do you have any other photos of it?  Which Atlas box did you start with?  Feel free to contact me off list.  I'ld love to chat about it.

The trucks could be the Micro Trains express trucks.  That's what I used.

Craig

Nick Lorusso

  • Crew
  • *
  • Posts: 292
  • Gender: Male
  • Lets see what I'm modeling this week
  • Respect: +154
Re: Weekend Update 5/19/13
« Reply #31 on: May 19, 2013, 06:49:37 PM »
0
a couple new models:

Pete 379 tractor:


Husker,
What does the wheel base work out to?
Regards,
Nick Lorusso
https://sbhrs.wildapricot.org/

towl1996

  • Crew
  • *
  • Posts: 820
  • Chairman of TRW Busty Cougar Welcoming Committee
  • Respect: +187
Re: Weekend Update 5/19/13
« Reply #32 on: May 19, 2013, 08:49:03 PM »
0
PRR GP9B now with brass handrails.

Never argue with idiots; they'll drag you down to their level, then beat you with experience.

craigolio1

  • Crew
  • *
  • Posts: 2739
  • Respect: +2388
Re: Weekend Update 5/19/13
« Reply #33 on: May 19, 2013, 11:32:12 PM »
0
I love scale handrails.  Great work!

delamaize

  • Crew
  • *
  • Posts: 2668
  • Gender: Male
  • Prairie Line Native
  • Respect: +1049
Re: Weekend Update 5/19/13
« Reply #34 on: May 20, 2013, 12:54:15 AM »
0
No pictures, but I got the trackwork the new layout worked out, and now the A4, witch is the pickiest loco I have, has been running for about 3 hours.
« Last Edit: May 20, 2013, 12:59:58 AM by delamaize »
Mike
Skookumchuck Belt Line Founder

Northern Pacific, Tacoma Division, 4th subdivision "The Prarie Line" (still in planning stages)

CodyO

  • Crew
  • *
  • Posts: 848
  • Gender: Male
  • Cody Orr-SPF
  • Respect: +194
Re: Weekend Update 5/19/13
« Reply #35 on: May 20, 2013, 10:13:22 AM »
0
Love that GP9B!
Modeling the Pennsylvania Middle Division in late 1954
             Nothing Will Stop The US Air Force

wcfn100

  • Crew
  • *
  • Posts: 8956
  • Respect: +1392
    • Chicago Great Western Modeler
Re: Weekend Update 5/19/13
« Reply #36 on: May 20, 2013, 10:37:17 AM »
0
PRR GP9B now with brass handrails.



Why so many stanchions in the 'cab' area?

Jason

nstars

  • Crew
  • *
  • Posts: 562
  • Gender: Male
  • Respect: +81
Re: Weekend Update 5/19/13
« Reply #37 on: May 20, 2013, 11:04:11 AM »
0
Progress report on the Centipedes, they are almost done.


Marc
« Last Edit: May 20, 2013, 12:49:37 PM by nstars »

chicken45

  • Crew
  • *
  • Posts: 4500
  • Gender: Male
  • Will rim for upvotes.
  • Respect: +1014
    • Facebook Profile
Re: Weekend Update 5/19/13
« Reply #38 on: May 20, 2013, 12:22:48 PM »
0
Progress report on the Centipedes, they are almost done.

/>
Marc

Looking great!
Josh Surkosky

Here's a Clerihew about Ed. K.

Ed Kapucinski
Every night, he plants a new tree.
But mention his law
and you've pulled your last straw!

Alternate version:
Ed Kapucinski
Every night, he plants a new tree.
He asks excitedly "Did you say Ménage à Trois?"
No, I said "Ed's Law."

eja

  • Crew
  • *
  • Posts: 1528
  • Gender: Male
  • Respect: +280
Re: Weekend Update 5/19/13
« Reply #39 on: May 20, 2013, 03:08:19 PM »
0
Looking great!


That Tuscan one looks like it rides a little high   :ashat:

nstars

  • Crew
  • *
  • Posts: 562
  • Gender: Male
  • Respect: +81
Re: Weekend Update 5/19/13
« Reply #40 on: May 20, 2013, 04:48:12 PM »
0

That Tuscan one looks like it rides a little high   :ashat:

Perhaps you won't believe it, but both have the same chassis and therefore also the same height. It just shows how much is covered up by the pony truck and pilot. It also shows what the overhang is of the engine. It does need wide curves. :D

Marc

towl1996

  • Crew
  • *
  • Posts: 820
  • Chairman of TRW Busty Cougar Welcoming Committee
  • Respect: +187
Re: Weekend Update 5/19/13
« Reply #41 on: May 20, 2013, 07:43:28 PM »
0
Why so many stanchions in the 'cab' area?

Jason

I.Don't.Know.

                                                                                                                                                                         
According to the PRR loco bible, Pennsy Power II, the prototype had 6 stanchions in the cab area, I have 8. The prototype were unequally spaced, I measured mine so they are equally spaced. :?  Truth be told, I messed up the other side of the stanchions, I folded them the wrong way around the hand rail. So, a redo will be required at some point.

However, I sprayed DGLE on it, which can cover alot of sins, and it doesn't look 'that bad'. But the truth hurts.

Good eye.
Never argue with idiots; they'll drag you down to their level, then beat you with experience.

PGE-N°2

  • Crew
  • *
  • Posts: 208
  • Gender: Male
  • Respect: 0
Re: Weekend Update 5/19/13
« Reply #42 on: May 20, 2013, 11:33:03 PM »
0

Finally, I needed an Ultra-dome or two, which was going to be a problem until a friend of mine did them using a 3D printer.
 Here are the first shots.  I have added a layer of Bondo spot putty to the sides and sanded them to make them nice and smooth.  The top windows are solid. 
Due to the thin window frames, there would have been no strength there.  The prototype has tinted windows anyway so once painted black they will look good enough until a more accurate model comes a long.

I did two cars.  One with the long back porch and one with the short.





Thanks for looking, Craig

Wow, those look quite realistic... It would be great to see the completed train used in a photo contest someday... Maybe even used outdoors, it would definitely look like the real train.
Director of Operations of the Kettle River Railway

See photos of the original owner's layout here:
https://m.flickr.com/#/photos/about-face/sets/72157603977732928/

It sounded like a good idea at the time... too bad the caboose wasn't in on the plan.

Catt

  • Crew
  • *
  • Posts: 1721
  • Gender: Male
  • Respect: +28
    • Boylerwerx
Re: Weekend Update 5/19/13
« Reply #43 on: May 21, 2013, 07:16:48 AM »
0
What I did last Sunday.Truck by Stony Smith and Shapeways decals by Karin Snyder weathering by me .This is Z by the way.

Johnathan (Catt) Edwards
Sole owner of the
Grande Valley Railway
100% Michigan made

dougnelson

  • Crew
  • *
  • Posts: 1349
  • Gender: Male
  • Respect: +2418
    • PRR N Scale
Re: Weekend Update 5/19/13
« Reply #44 on: May 21, 2013, 11:33:40 AM »
0
This was how I spent my weekend.  Saturday was at the PRRT&HS meeting with the dinner at the RR Museum of PA and a table by GG1 4935.  Sunday was a trip to Horseshoe Curve to see and hear NKP 765 steam on the Curve.  The N scale connection is that Todd Treaster was in the cab as the NS engineer pilot.  It was awsome.

YouTube link:
/>

« Last Edit: May 21, 2013, 11:43:00 AM by dougnelson »