0 Members and 1 Guest are viewing this topic.
Here are a few. Though the majority are trough hatch, the last car is the round hatch type. If I'm not mistaken, IM has not done the round hatch car in the black CP Rail scheme... with or without the multimark.....http://freight.railfan.ca/cgi-bin/image.pl?i=cp383965&o=cprail
One more photo, Richard, as well as a link to a really useful site on CDN freightcar fleets.http://freight.railfan.ca/cgi-bin/image.pl?i=cp383971&o=cprailhttp://nakina.net/
Given that several people have seconded (and thirded) my request for the Procor pressure flow hopper cars in N Scale, may we ask you to pass it along to the P&D team as well?Regards,Tim
Those two cars are 3800cuft cars that are smaller than the Intermountain car, so if they ran those numbers they would be that word that cannot be mentioned on the Atlas forum.
Yeah, I see that. Can never remember what the IM car is (4550cuft). Probably shouldn't post without checking reference material. Is the IM car HS, MIL or NSC? Suppose not HS as that is what the NARC car is modeled after.
We do have a variety of parts available however, some of them can be in short supply with extended wait times for their arrival. Something like an etched metal roofwalk might not be available until we re-run the car requiring that particular piece. If you have a specific parts request just drop an email to parts@intermountain-railway.com and we'll see what we can do.
Unless you have a direct contact, I'd call instead. I think you'll get a more timely turnaround via a phonecall rather than an email to one of the generic addresses.
Thanks. I'll give them a week or so (I contacted parts@... ), then call if necessary.