0 Members and 1 Guest are viewing this topic.
This is a canonical example of what in engineering circles would be referred to as a "kludge".At essence, these serve to mask the problem, not solve it; furthermore they introduce problems of their own, such as reduced effective engine power, increased tendency to stringline, or have compression derailments when pushing (esp thru tight curves or turnouts). It's more or less equivalent to moving cars with the brakes applied.Ed
Fair enough...but I've found my BLI M1 (the latest release) can pull anything I ask of it, so additional rolling resistance may not be as bad as all that. But you're right...it's another example of a Band-Aid.
All this slinky talk has got me confused (I thought N-Possibles did away with the slink!).Please tell me all this slinky talk has absolutely nothing to do with N-Possibles (another extreme thread drift? )
Are they still 3D printed or did they go into production?
How well do these couplers work in T-TRAK situations?
Yes and yes. 3d printing = production. (Okay, not everything is on the market yet, but they will be 3d printed when they are.) The print quality is top notch!
Must they only be body-mounted? And are they universally compatible with MTL and Accumate couplers?
Maybe it’s just me… but the most recent bunch I received seemed even cleaner than the early ones. Either he tweaked (and improved) the print or is doing a more precise job of trimming supports. Regardless… I’m happy!
Oh I haven't been paying attention. I thought the idea was test in 3D and then do plastic. And I never saw plastic ones.Carry on and 3D print the whole world.
You're not wrong... Anything else is just a Band-Aid on a sucking chest wound.
I saw someone who took the spring out of MTL couplers and replaced it with a length of a cut up rubberband of similar enuf diameter that eliminated the slinky in both the 1015s, &1025s, as well as truck mount couplers. I'm guessing length was about the same as the spring, just not so sure the rubber would last long without drying up or "melting".