Author Topic: Horst Air Filter Printing (Read 8928 times)

kalbert · « **Reply #45 on:** January 07, 2014, 01:18:24 AM »

Ufda I don't know. I enjoyed doing these, and their round counterparts should be easy, but a whole gp11 is a fair bit outside my skill level and free time. The filter boxes on either side might be doable though...

FEC Railway · « **Reply #46 on:** January 07, 2014, 12:00:19 PM »

Was sorta stiring the Paducah Geep debate...

Philip H · « **Reply #47 on:** January 07, 2014, 12:15:24 PM »

well I'd appreciate either or both . . . .

Snark45 · « **Reply #48 on:** January 25, 2014, 12:10:07 PM »

Hi Folks

Just wondering if the n-scale Horst air filter aspect of this project ever went anywhere. I see the item on Shapeways, but it's still marked "not for sale".

Thanks,
Harry

kalbert · « **Reply #49 on:** January 27, 2014, 12:42:47 AM »

Still working in this. I've got another sample ordered to see if some minor changes look better. Should see them this week and will report back!

Snark45 · « **Reply #50 on:** January 27, 2014, 08:59:24 PM »

Super!

Thanks a bunch for the quick reply. Harry

kalbert · « **Reply #51 on:** February 04, 2014, 09:10:46 PM »

I finally got the last samples in. My attempts to reduce the cost of these things were in vain, so I reverted back to the original design. I photographed them and they are now available. They are not cheap, but they are available. The only person getting rich off this is Shapeways, but it's still a cool process and was fun to do, not to mention filling what I think was a gap in N scale parts. I will be modifying the design for the ICG GP10 round style and then... well... I've got a bunch of neat ideas, we'll see what happens!

http://www.shapeways.com/model/1479853/n-scale-air-filters-1.html

Snark45 · « **Reply #52 on:** February 04, 2014, 10:16:53 PM »

I placed my order today. Thanks for all your effort on this project. Harry

Catt · « **Reply #53 on:** February 05, 2014, 07:35:42 PM »

I've seen much worse pricing than this.Don't have a need for them yet but I've added your page to see what other goodies you can come up with.

kalbert · « **Reply #54 on:** February 06, 2014, 10:13:03 PM »

For those that were interested in the GP10 units, modifications to the design are done and they are now available as well. I didn't order a sample of them, but I will next time I am placing an order. The whole shipping cost thing... I have no reason to believe these wouldn't work as well as the first design did though, they are essentially the same just sans flares.

http://www.shapeways.com/model/1690594/n-scale-air-filters-2.html

kalbert · « **Reply #55 on:** February 07, 2014, 09:18:27 PM »

I found a guy on shapeways doing exhaust stacks that should come in handy for an SD10.

http://shpws.me/qLGn

Author Topic: Horst Air Filter Printing (Read 8928 times)

kalbert

Re: Horst Air Filter Printing

FEC Railway

Re: Horst Air Filter Printing

Philip H

Re: Horst Air Filter Printing

Snark45

Re: Horst Air Filter Printing

kalbert

Re: Horst Air Filter Printing

Snark45

Re: Horst Air Filter Printing

kalbert

Re: Horst Air Filter Printing - Now Available!

Snark45

Re: Horst Air Filter Printing

Catt

Re: Horst Air Filter Printing

kalbert

Re: Horst Air Filter Printing

kalbert

Re: Horst Air Filter Printing