Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Login
Register
TheRailwire
»
General Discussion
»
DCC / Electronics
»
Atlas RS2 Loksound install (n scale)
« previous
next »
Print
Pages:
1
[
2
]
Go Down
Author
Topic: Atlas RS2 Loksound install (n scale) (Read 405 times)
0 Members and 1 Guest are viewing this topic.
PanAmShay
Crew
Posts: 88
Respect:
+39
Re: Atlas RS2 Loksound install (n scale)
«
Reply #15 on:
November 07, 2026, 12:56:06 PM »
0
Peteski--close, it is an Excel Razor Saw.
https://excelblades.com/products/razor-saw-kit
. I can feel it dulling after having used the blade for cutting 3 frames, but it still worked just fine. I liked that the blade "support" can rest on the vice w/o marring it and acts as an impromptu guide. That along with the tall blade height helped make the cut straight.
Sumner--thanks for recommendation. I've ordered the jewelers saw you linked to so I'll have it at the ready for the next project.
I ended up accidentally breaking one of the soldered on motor contact tabs, as you have to spread them farther than expected to remove the DC light board, due to some unnecessary material in the frame. I should have de-soldered them first. I couldn't find a part number for these. In the schematic that came with the loco, they are shown on the DC light board pn 1662-X001. Atlas lists their analog PCB for RS2 as 3504B07, but no picture or clue if for this model. Since you have to de-solder the motor contact tabs anyway, I might just hardwire the decoder to the motor, which might save space and fit better in the shell. But if anyone knows what these tabs are, let me know!
https://shop.atlasrr.com/p-56107-n-rs2-analog-pcb.aspx
[ Guests cannot view attachments ]
Logged
MK
Crew
Posts: 4371
Respect:
+956
Re: Atlas RS2 Loksound install (n scale)
«
Reply #16 on:
November 07, 2026, 02:39:12 PM »
0
I wonder if these Kato ones will fit.
https://katousa.com/product/circuit-board-power-clips-n-scale/
Note, the part number is
9
28500. It's out of stock from Kato but you may be able to locate them elsewhere.
Logged
PanAmShay
Crew
Posts: 88
Respect:
+39
Re: Atlas RS2 Loksound install (n scale)
«
Reply #17 on:
November 07, 2026, 02:55:45 PM »
0
MK, thanks. I think those jog outboard more than the atlas ones, but might be good enough! Stopping at two local dealers today, will see what they have...
Logged
PanAmShay
Crew
Posts: 88
Respect:
+39
Re: Atlas RS2 Loksound install (n scale)
«
Reply #18 on:
November 08, 2026, 10:46:12 AM »
0
Well this is a bit frustrating. I can't seem to find a schematic of the ESU 58781 SD90 board to show which light pad is + and which is -. It has a circle and square like the 58741, but that board has different arrangement of the circle and square and they aren't consistent for + and - either. The paper quick start guide doesn't have it, the latest Version 15 manual doesn't have it, Streamlined Backshop doesn't have it. I guess it will be trial and error!
Logged
peteski
Crew
Posts: 35434
Gender:
Honorary Resident Curmudgeon
Respect:
+6696
Re: Atlas RS2 Loksound install (n scale)
«
Reply #19 on:
November 08, 2026, 11:43:29 AM »
0
The non-up-to-date and poor description of the solder pads (and often lack of GND and U+ info) was why I started the series of my ESU decoded decoder threads. If your decoder looks like the one in the photo on
https://sbs4dcc.com/products/esu-58781-loksound-5-micro-direct-nmra-dcc-sound-decoder-n-drop-in-board-for-sd80-90mac-series-rsc2-rs2-and-others.html
then the pad layout should be same as 58718 and the other related LokSound and LokPilot decoders for Kato locos. As I mentioned earlier, the shape of the PC board is slightly different between those decoders but the pad layout should be the same.
While I have not finished the writeup, here are the pad definitions for 58741. See if that works for you.
Logged
. . . 42 . . .
PanAmShay
Crew
Posts: 88
Respect:
+39
Re: Atlas RS2 Loksound install (n scale)
«
Reply #20 on:
November 08, 2026, 12:06:25 PM »
+2
Peteski--Thanks for sharing. I had looked at the 58741 schematic, but the circle and square were opposite on the front light pads of 58781. Not knowing that that meant, I felt I had to test it. So onto the lokprogrammer and I just rested the LED on the pads and tested both options. I got everything assembled now.
I very slightly trimmed the decoder where the motor contact clips on so that I could affix the clips further forward (long hood front) and space away from the frame. I got some Kato straight motor clips which fit a little better due to the ESU board being 1mm wider than the factory DC board at the clip pads. Thanks to Paul at PNP Trains for the clips, where I got the decoder and speaker as well.
Speaker was ESU 9x16 50342 with .020" styrene sheet. I've never directly mounted to a styrene sheet before, always used a 3d printed or molded enclosure with at least 1mm of height. It sounds good enough with the shell off. A little quiet, but I really didn't have as much room as I would have liked. I used the factory LED for the short hood end and a warm white surface mount for the long hood.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
Logged
peteski
Crew
Posts: 35434
Gender:
Honorary Resident Curmudgeon
Respect:
+6696
Re: Atlas RS2 Loksound install (n scale)
«
Reply #21 on:
November 08, 2026, 12:46:55 PM »
0
Ah, so the anode/cathode of those LED pads are flipped? I did not know that. With diodes, the cathode pin is usually marked or identified. A square pad is that identification, but unless one is familiar with circuit boards one would not know that a round pad is usually a "plain" pad, with square pad being the unusual shape denoting things like cathode or pin1 in multi-pin devices or connectors.
The install looks good!
So how is the light leakage without that kludgy black electric tape?
I'm also curious if the trucks coil springs on the sideframes look like coils, or are depicted as smooth cylinders? The latest RS-3 has them as smooth cylinder shapes but that one uses an all new mechanism and the trucks are also new, not compatible with the split-frame chassis.
Logged
. . . 42 . . .
PanAmShay
Crew
Posts: 88
Respect:
+39
Re: Atlas RS2 Loksound install (n scale)
«
Reply #22 on:
November 08, 2026, 01:31:10 PM »
0
Peteski,
Yeah, I figured the square was important. More odd was the Atlas LEDs did not have a flat on one side of the plastic lens like is common, so I couldn't identify the right polarity for that either. Anyway, the trial and error method took by 5 minutes so not a big deal.
The trucks on this have molded in spring detail. See pic from before I painted the axle cups
No light leakage noticed. I also added some shrink-wrap around the long hood led and some more capton around the LED leads. With the factory electrical tape gone, the shell fits perfectly on the frame. nice and snug but comes out with decent taps. Sound is good with the shell installed.
Here it is in front of the Vernonia, Oregon depot that I modeled and 3d printed (rough print, better to follow) on our NTRAK module. I don't know for certain if this exact RS-2 made it out to Vernonia, but I'm believe other SP&S RS-3 units did.
[ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]
Logged
peteski
Crew
Posts: 35434
Gender:
Honorary Resident Curmudgeon
Respect:
+6696
Re: Atlas RS2 Loksound install (n scale)
«
Reply #23 on:
November 08, 2026, 11:51:25 PM »
0
If those LEDs do not have a collar around the bottom of the case then they usually do not have flat spot identifying cathode. Another way to identify cathode is to look at the shape of the metal leads inside the clear case. The larger one is almost always cathode, but after dealing with hundreds of LEDs over the years I have seen some reversed ones where the larger one is the anode. With white LEDs, in my experience the larger metal lead is pretty much guaranteed to be cathode.
That depot building looks good and thanks for the closeup of the truck. While the coil springs are well rendered all the other sideframe features seem to have fairly shallow relief. It seems flat. I wonder if Atlas remade those trucks because Kato's versions seemed to look better to me. The trucks used with the more recent RS-3 chassis also have very flat look to them and the coil springs are just smooth cylinders. But I'm really going off tangent in this thread.
Logged
. . . 42 . . .
PanAmShay
Crew
Posts: 88
Respect:
+39
Re: Atlas RS2 Loksound install (n scale)
«
Reply #24 on:
November 09, 2026, 01:02:47 AM »
0
Peteski,
Here is a new run Atlas RS-3. Springs aren’t quite as detailed as the 2020 RS-2, but still some detail in there
[ Guests cannot view attachments ]
Logged
peteski
Crew
Posts: 35434
Gender:
Honorary Resident Curmudgeon
Respect:
+6696
Re: Atlas RS2 Loksound install (n scale)
«
Reply #25 on:
November 09, 2026, 10:08:28 AM »
0
Boy, am I having senior moments.
The truck I was mentioning is not from the recent RS-3 but from a most recent C424 which uses the totally redesigned mechanism. I worked on both recently and got confused. The details are simplified and flat.
Logged
. . . 42 . . .
PanAmShay
Crew
Posts: 88
Respect:
+39
Re: Atlas RS2 Loksound install (n scale)
«
Reply #26 on:
November 09, 2026, 11:47:14 AM »
0
Wow, that is disappointing on the C424 truck. I see what you mean. There is plenty of other detail in there that is smaller than the coil springs would be. Wonder what happened there...
Logged
Print
Pages:
1
[
2
]
Go Up
« previous
next »
TheRailwire
»
General Discussion
»
DCC / Electronics
»
Atlas RS2 Loksound install (n scale)