Makes sense but it says 3 files. How do you print in chunks that will work with your particular printer and include all the supports? Is that something that comes with the printing software?
I can't speak for all slicing software, but some slicing apps offer the capability of making precision cuts of your stl file to cut and modify them in several ways (relatively simple ways) to fit your 3D printer's build plate so you can assemble the model after it's done being printed.
For models and parts that require assembly, an effective way of "gluing" them together is to use the same resin they're printed with straight out of your resin vat, apply it to one of your parts you're putting together, hold in place and shine a UV flashlight on to the liquid resin you've applied to your cured parts. Doesn't take long for the liquid resin to cure and "glue" your parts together. Always use Nitrile gloves on both hands, have eye protection and work in a well-ventilated space.
I use Anycubic ABS-Like Resin Pro 2 almost exclusively for huge and tiny parts, and it sands, cuts, drills, threads and glues together excellently while retaining a modicum of flexibility (non-brittleness) and allows high detail, as well as having a low odor.
Of course, the other option is to buy a bigger printer, which is what I did to produce some of the huge G-scale parts I've been working on. But, even then, I have to assemble the models later since the body of what I'm developing is too long to print in one piece, even having one of the largest available 3D resin printers on my printing workbench. Integral registration tabs make gluing and assembly exponentially easier, which I did using the paid version of Lychee Slicer...which is my go-to slicer app.
Of course, slicer software allows you to do your supports and rafts before slicing since that's what the software is for. BUT, some slicing apps are more capable than others allowing additional operations on your files than merely supporting and slicing.
Photo (1) - G-scale car body printed in two halves:
Although I attempted to print this model on my 10" printer, and it worked...barely, being able to purchase and use the larger printer for this project (for a customer) and other big future projects, was worth the purchase price for me. If I were not planning on using it commercially, just printing a one-off model for my own use, I wouldn't have considered buying it...since I have no interest in G-scale for my own model railroading. Everything I want for N-scale I can print on my 3.5 year old 10" printer.
Cheerio!
Bob Gilmore