Author Topic: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale  (Read 550 times)

0 Members and 1 Guest are viewing this topic.

Dwight in Toronto

  • Crew
  • *
  • Posts: 670
  • Respect: +390
Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« on: November 23, 2024, 04:26:14 PM »
+2
I was going to title this topic “Scratchbuilding CPR’s Sandford Fleming”, but I ended up using some parts and components from an Atlas coach, so I guess it’s more of a scratch-bash.

Anyway, I think it was summer 2023 when TRW’s Lenny posted a pic of CN’s business train in  Montreal, the last car of which was something I’d never seen before - a theatre car.  As luck would have it, two days later I was putting gas in my car, watching a CN intermodal roll by, and wouldn’t ya know … the very same string of business cars was tacked on the end, heading westbound across north Toronto, giving me a not-nearly-long-enough teaser of a look at that unique observation car.  I was later to learn that the named coach was Sandford Fleming:




As most would know, CPKC ran The Empress down to Mexico and back earlier this year, and I was surprised to see them using Sandford Fleming as the end-of-train coach on that run, but in the vintage tuscan livery:




WTF?  Did CP purchase the car from CN?  I was confused, and started looking into things.  Rudimentary research revealed that CP’s theatre coach is a different unit - a closer look at the number of tiered windows is a giveaway.

A Brief History:
The current CP car was built in 1949 as New York Central 10 roomette/6 double bedroom sleeper 10333 "Saugus River". It became CN sleeper 2091 "Skeena River" in 1965.  It got converted to a track inspection car in 1978, sported a crimson-&-cream paint job for a while, and was eventually given VIA’s blue & yellow scheme. The car was sold to Canadian Pacific in March 2013, and painted bright red.  Within the last two or three years, it received its current vintage tuscan livery.  So, the name "Sandford Fleming” now graces both CN’s (ex-Illinois Central) theatre car, and CP’s version. 
 
Side note - Sir Sandford Fleming “was Canada's foremost railway surveyor and construction engineer of the 19th century and a distinguished inventor and scientist."  One of his inventions was time zones!

Anyway, here are a few pics showing some of the paint jobs that have adorned this coach over the last 70+ years:











I hope they stripped the old layers of paint off that thing between schemes, otherwise the mass of pigment on there must weigh almost as much as the coach itself at this point! 

Henceforth, we will only be concerned with the car as depicted in that last photo. 

« Last Edit: November 24, 2024, 06:54:59 AM by Dwight in Toronto »

Dwight in Toronto

  • Crew
  • *
  • Posts: 670
  • Respect: +390
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #1 on: November 23, 2024, 07:29:33 PM »
+2
I had been contemplating a scratch build of this project for some time, and two things gave me the impetus to make a start:
i)  inspiration from Tim Horton’s ongoing documentation of his N scale Sperry car fabrication, and
ii) stumbling on scale dimensioned drawings of the 10 roomette/6 dbl bedroom sleeper from which the theatre car was eventually derived:




Having a reference drawing was a huge shot-in-the-arm … suddenly, I was able to ascertain things like total car length, width, bogie spacing, height of car walls and roofline etc.  It also enables one to infer things like window dimensions, relative positioning on car walls, and so on. 

This exciting breakthrough enabled me to create an N scaled dimensioned drawing of the side walls, which I then transferred to 0.03” styrene sheet.  I then proceeded with Tim’s method of drilling out the corners of the windows with a #65 bit in a pin vice, followed by careful cutouts of the window openings with a new hobby knife blade:




Once all the window openings were roughed out, they needed to be carefully dressed and squared up using a small jewellers file.
« Last Edit: November 23, 2024, 07:32:48 PM by Dwight in Toronto »

Dwight in Toronto

  • Crew
  • *
  • Posts: 670
  • Respect: +390
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #2 on: November 24, 2024, 08:59:20 AM »
+3
The whole time I was tooling away on the window openings in the car sides, I was wondering how I was going to scratch build the roof.  The thickest sheet of styrene I have is 0.13”.  Although this was adequate to accomodate the curved profile of the roof, I could not see myself being able to file and sand my way to a convincingly smooth and flawless outcome.  My only thought was that perhaps I could find a donor car at a train show, and salvage or scratch-batch a suitable roof section.

That very weekend I attended a local train show (Pine Ridge Modellers event in Whitby, Ontario), and the first vendor’s table had a jumble box of a dozen or so passenger coaches.  An old Atlas CPR car caught my eye, as the roof possessed the correct profile, and also had the proper smooth-line finish (all of the others were clerestory types).  I had brought along one of my styrene car sides, and was pleasantly surprised to find that the old model was precisely 80’ long … exactly what I needed.  I didn’t think I’d come across a better find, so, “sold” for $15.00:




When I got it home, I pried the roof from the body.  This was an assembly design that I was familiar with, where the roof and window glazing are a single injection-molded piece of clear styrene with the roof section having been sprayed black.  I have a set of six Con-Cor passenger coaches of identical design - many here will know them, especially by the way the trucks are attached using a small slot-head bolt that screws into a 1/2” tall, hefty, threaded cylindrical steel fastener that sits in a circular casting within the interior car floor.  The bottom of the frame is embossed with “Atlas”, but it also says “made in Italy”, and there’s a nicely scripted “R” (Roco?):




Anyway, it turned out that my car sides could not have fit any better when held against the clear plastic window sections, and that the 0.03” thickness snicked up beautifully under the roof edge:




After fiddling, fondling and flipping things to & fro, I eventually decided to try to separate the Atlas car sides from the base.  After slicing through the floor with a smooth-bladed knife, I switched to a micro-saw blade and slowly worked my way along both sidewalls:




In time, and with sweaty brow, the deed was finally done:




You will see in the above pic that I chose to leave the door section at the head end of the coach intact.  I had been planning on scratch building this detail, but then decided “why bother?”.  I’m not applying for, nor submitting anything for NMRA master modeler certification, so why not take advantage of the better-than-I-can-do factory detail?  I’ll try butting my car side up against the salvaged segment later in the build, and hope I can achieve a seamless joint with a bit of Tamiya putty:




With that, I turned my attention to the tail end of the car, and tackled that big picture window.
I ended up on a pretty good roll; got myself into a modelling “groove” of sorts, and unfortunately, forgot about taking photos for a while. 

Regardless, in the following pic, I’ve built up the unique, and somewhat oddly-constructed end-of-roof detail that is such a distinctive feature of this car.  I also created the picture window opening, and added framing details.  I used my 1” belt sander to remove all the interior roomette sections to create a flat floor, upon which the tiered theatre seating will be constructed. 

Finally, I fabricated the rear window glazing piece.  I wanted to use something that would be a little thicker, harder and scratch-resistant than the thin window material we usually use.  For this, I cut a piece out of an old CD jewel case, then slowly filed the edges until I achieved a “Kato-like” friction-fit within the window frame.  With all the painting and interior construction still to be done, I didn’t want to glue the big window in place:




I then had a shot at fabricating the tiered theatre floor section:




In the course of researching Sandford Fleming, I’ve accumulated as many photos as I could find on the internet.  As evidenced earlier, there are a lot of exterior views.  However, I have not been able to locate a single pic of the interior of the car.  Well, there was one photo of the washroom facility, but nothing whatsoever on how the theatre section is actually configured.

I sent email enquiries to CP’s customer relations people in Calgary who operate their luxury excursion train.  They referred me to a separate organization in Montreal (ExpoRail) where all of CP’s archives are managed.  Those folks informed me that a cursory search came up empty, and that an in-depth investigation would cost $40, with additional fees for photocopy reproductions and mailing.  There was an added proviso that additional research may also strike out.  I thanked them, but said “no thanks”. 

So guys … one of my biggest frustrations with this build is not knowing what the theatre seating arrangement looks like.  There are a few tantalizing glimpses, in several exterior photos, where one can just barely make out people sitting in chairs and looking out the windows. 

But I just can’t discern enough detail to know how many tiers there are.  I’m guessing 3 elevations, of a single 7” step-rise each.  But how deep might each platform be - enough for one row of seats, or two rows per platform?  Four seats per row with an aisle between?  Fixed seating, or moveable armchairs?  Are there any handrails?  What colour is the seating?  Carpeted floor and colour(s), or hardwood?  Are the interior walls/finishes mahogany, or something else? 

Normally, we don’t obsess in this way over N scale interiors.  However, in this case, the large side windows and the huge end window render the interior unusually visible, so it’s important. 

Unless I strike it big with break-through help from the great folks here on TRW, I’m afraid that I’m just going to have to wing it with respect to the interior decor.   So, fingers crossed … how ‘bout it guys - can anyone work some magic and shed some light on how these theatre cars are typically set up inside?

In the meantime, I’ll move on to addressing the roof details on this build, which has some interesting components.


peteski

  • Crew
  • *
  • Posts: 32972
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5345
    • Coming (not so) soon...
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #3 on: November 24, 2024, 09:55:24 AM »
0
Dwight, since we have the "Prototype" section in the forum, and maybe not everybody who is really knowledgeable about prototype RR frequents this section, why not start a thread there askign for help in researching the interior of this car?  We have bunch of Canadian railroad modelers here. Someone will likely have some info/photos/drawings of the car's interior. Not sure how much research have you done, but since the observation end is so visible through the large windows, maybe there are some photos online which will help out in figuring out the interior setup.
. . . 42 . . .

Dwight in Toronto

  • Crew
  • *
  • Posts: 670
  • Respect: +390
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #4 on: November 24, 2024, 12:55:11 PM »
0
Peter - thanks for the suggestion - I’ll give that a shot.

Dwight in Toronto

  • Crew
  • *
  • Posts: 670
  • Respect: +390
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #5 on: November 25, 2024, 03:59:14 PM »
+2
I’m still hopeful that someone might yet come through with some info on this theatre car’s interior configuration.  But in the meantime, I uncrossed my fingers so that they could try fabricating a bunch of tiny components that populate the coach roof.

First, I tackled the triple horn array that sits near the very end of the car.  I tried my best to figure out the supportive bracketry by zooming in on my stock of proto photos.  I think I captured the essence of the bracket, as shown near the bottom edge in the following pic; a photo of the real thing is in the background for comparison.  The horns are from Kato’s spare parts store:




There are several roof features closer to the front of the car, and I don’t mind admitting that I do not know what these various objects are for.  First, there are, what appear to be, a matched pair of side-by-side, downward-directed exhaust fans fitted right where the edge of the roof meets the car side.   Inboard of these, centred on the peak of the roof, is a shallow hatch or something.  And then a little bit further towards the front of the car is a rectangular section where the roof has been notched-out, through which two cylindrical chimney stacks of some sort protrude … a fairly wide pipe with a curved elbow termination and opening that faces the front of the car, and a narrower sheet metal stack with a round cap that resembles a furnace or water heater vent.  Again, I’ve included a photo of the real thing just behind the model:




I fabricated the chimney pieces by clamping 1/4” and 1/8” styrene rod in my cordless drill, and then “turning” them using a variety of hobby knives, files and sanding sticks.  I’ve used this “poor man’s lathe” on other projects to shape things like compressed air cylinders, fuel tanks, and even an N scale bell from brass tubing:




Sticking with off-the-wall tools & techniques for a bit, I’ve also been using a variety of Lego bricks to assist with making styrene pieces true and square.  These precision-made little blocks are highly versatile, flexible and useful for all kinds of fine-tuning applications.  The two blocks shown on the left have been fitted with 4 grades of sandpaper - one piece on each of the longer dimension sides - using double sided tape.  These do a great job of squaring up and dressing the sides and ends of styrene shapes:




Here’s an example showing how the blocks have been arranged to help ensure that the razor saw cuts a nice, square finish on the end of a piece of styrene tubing:




As I say, the utility of Lego blocks for hobby support is extensive!


To close out this segment, here’s a final pic of the roof details, with a comparison to the prototype in the background (note the fairly tall columnar structure with the domed top, roughly 2/3 of the way towards the rear of the car … I don’t have the foggiest idea what that is either!):




I still have to make four hand grabs using 0.015 brass wire (two at the rear of the roof, and two at the front), followed by a fresh coat of flat black paint. 

I also need to start thinking about the abundance of lighting that’s at the rear of the car, as well as how to equip the undercarriage with Kato power-pickup passenger trucks (I’ve got two spares as used on Kato’s SP Morning Daylight coaches).  Still a ways to go!
« Last Edit: November 25, 2024, 06:26:46 PM by Dwight in Toronto »

Dwight in Toronto

  • Crew
  • *
  • Posts: 670
  • Respect: +390
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #6 on: November 28, 2024, 05:16:25 PM »
0
I plugged away on the internet, and found a couple more theatre car photos.

First, I finally found a clear image showing the plethora of roof details on Sandford Fleming as it currently exists:



All the small bits that I made for my model are still there, with one exception - the tall, dome-topped column that I included (roughly mid-ships) seems to have been removed at some point. 
But there are a few additional features that are still hard to make out … some sort of a big, tilted/angled, circular frisbee-looking thing (antenna?), a sizeable bare aluminum-looking hatch or something, and at the very head-end of the car, some kind of a shallow profile, peaked-roof cupola structure of some kind.  Damn, I wish I knew what all these roof fittings were!  Anybody?


And finally, I was surprised to discover that there are LOTS of track inspection/theatre cars out there!  Here I thought that only CN and CP had one each.  And I did finally find an interior photo (not sure whose coach this is taken from)):




And in this pic of a Conrail unit, the seating configuration is somewhat distinguishable:




Armed with this new info, I’ll start addressing an interior layout for my model that is at least a plausible, educated guess!


« Last Edit: November 28, 2024, 05:20:07 PM by Dwight in Toronto »

Mike C

  • Crew
  • *
  • Posts: 1038
  • Gender: Male
  • Respect: +165
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #7 on: November 28, 2024, 05:33:23 PM »
0
  Is there a kitchen in the front end ?

Dwight in Toronto

  • Crew
  • *
  • Posts: 670
  • Respect: +390
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #8 on: November 28, 2024, 06:31:14 PM »
0
Hey Mike - I wish I knew! 

But I think that’s a highly likely probability.  I did find references to other business train theatre cars having kitchens and dining rooms.  And that would explain at least two of the chimney fixtures. 

The tilted saucer-like item has me puzzled.  And in that first photo in the above post, it looks like the two cars preceding Sandford Fleming each have the very same thing on their roofs.  Beats me!
« Last Edit: November 28, 2024, 06:39:18 PM by Dwight in Toronto »

Simon D.

  • Crew
  • *
  • Posts: 188
  • Gender: Male
  • Respect: +50
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #9 on: November 29, 2024, 01:13:03 AM »
0
Satellite dish?

Dwight in Toronto

  • Crew
  • *
  • Posts: 670
  • Respect: +390
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #10 on: November 29, 2024, 07:45:58 AM »
0
Ahhhh - Simon D, good guess …. hmmmm, I wonder.  Makes sense, mate.  Maybe for cell phone support etc.

With all the folks on TRW who repeatedly demonstrate their vast and admirable knowledge of every little RR-related detail, I thought that my questions about passenger car roof componentry would have been answered in short order.  And authoritatively, vs educated guesses!

Oh well - I can only suppose that “those who know” have just overlooked this thread.

Philip H

  • Crew
  • *
  • Posts: 8911
  • Gender: Male
  • Respect: +1655
    • Layout Progress Blog
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #11 on: November 29, 2024, 11:04:05 AM »
0
Those are definitely satellite dishes in a stowed position.  Likely on a positionable arm that is motorized at its base to hit what ever satellite network they use regardless of car orientation. 
Philip H.
Chief Everything Officer
Baton Rouge Southern RR - Mount Rainier Division.


Dwight in Toronto

  • Crew
  • *
  • Posts: 670
  • Respect: +390
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #12 on: November 29, 2024, 01:34:26 PM »
+2
Philip H - thank you very much.  Great to know!  The satellite dish had not yet been added to the car in the photos I was using when I modelled the roof details, so now I have to decide whether to add it or not. 

In the meantime, I made up a dozen comfy chairs, painted them to represent oxblood red leather upholstery with fixed-to-the-floor metal bases, and epoxied them onto the tiered platforms.  I painted the flooring a light gray (in my imagination, it’s commercial carpeting).  Although not visible in the pic, I’ve covered the interior walls with a mahogany-look finish.  My overall (entirely made-up) interior colour theme is in keeping with CP’s vintage maroon-&-gray scheme:




The car sides have been airbrushed with primer, so the next step is to spray a coat of tuscan.


MRLX1020

  • Crew
  • *
  • Posts: 207
  • Respect: +43
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #13 on: November 29, 2024, 09:33:02 PM »
0
Theater Car round up -

The Current CN unit is made from a former Wabash ACF coach

The CP Fleming was previously CN Fleming, sold in 2012 when HHH switched teams - former NYC, and there's more CN and UP in the CP business train than original CP...

The non-Budd CSX/CR car is a former CN car

The UP/CNW car is a former CN Cape series car - so all the class ones should swap theater cars and "send them home"

NS and BNSF at least have "native" cars - former Southern and ATSF, respectively...

Dwight in Toronto

  • Crew
  • *
  • Posts: 670
  • Respect: +390
Re: Crafting CPR’s ‘Sandford Fleming’ Theatre Car in N Scale
« Reply #14 on: November 30, 2024, 05:41:44 AM »
0
Great roundup on the various theatre cars out there … many thanks!

If nothing else, this thread will be a good repository of theatre cars info, should anyone else venture down this path someday.