Author Topic: Weekend Update 9/29/24  (Read 2426 times)

0 Members and 1 Guest are viewing this topic.


bbussey

  • Crew
  • *
  • Posts: 8873
  • Gender: Male
  • Respect: +4704
    • www.bbussey.net
Re: Weekend Update 9/29/24
« Reply #1 on: September 27, 2024, 07:44:35 PM »
+29
First print attempt of the REA and USPS complex, consisting of only three pieces due to being rendered on the large build plate of an AnyCubic Proton M3 Max. The brick walls are one of the separate components, so all the parts can be airbrushed their base paint colors – Liquitex burnt red for the brick and Tru-Color Hunter green for the slatted walls. There are some minor issues that I will change if these need to be reprinted, but it appears that I will be able to move forward with these prints. I think I’m going to build it on a styrene base which then will be inset in place on the layout.




Bryan Busséy
NHRHTA #2246
NSE #1117
www.bbussey.net


wm3798

  • Crew
  • *
  • Posts: 16095
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +6365
    • Western Maryland Railway Western Lines
Re: Weekend Update 9/29/24
« Reply #2 on: September 27, 2024, 08:07:38 PM »
+25
I got a wild hare and built a resin kit I've been carrying around forever.



Needs a seal coat and some weathering.  But it was fun to add another interesting car to the steam era fleet.
I also had fun remembering how easy dry transfers are to work with.

Lee
Rockin' It Old School

Lee Weldon www.wmrywesternlines.net

Sumner

  • Crew
  • *
  • Posts: 332
  • Gender: Male
  • Respect: +674
    • My Home Pages....
Re: Weekend Update 9/29/24
« Reply #3 on: September 28, 2024, 10:07:24 AM »
+13
Add a sawmill green chain that is modeled loosely off of the one at Hull-Oakes Sawmill. It will be part of my sawmill scene and will attach to the side of the main sawmill building. I decided to put the print files up thinking maybe someone else could use it in a sawmill scene. If you do send me some pictures and I'll add them to the build.









Also have the print files up for ....



.... the posts, beams and roof.  Hope some of you guys can maybe get some use out of this design.

=========================================

You can find the print files for the 'green chain' on thingiverse ( HERE ).

=========================================

More info on the green chain on my site ( HERE ).

A link to this whole build ( HERE ).

Sumner
Working in N Scale ---Modeling UP from late 40's to early 70's very loosely......

Under$8.00 Servo turnout Control --- 3D Printed Model RR Objects -- My Home Page

http://1fatgmc.com/RailRoad/RR Main/Link Page Menu.html

Ed Kapuscinski

  • Global Moderator
  • Crew
  • *
  • Posts: 24634
  • Head Kino
  • Respect: +9004
    • Conrail 1285
Re: Weekend Update 9/29/24
« Reply #4 on: September 28, 2024, 10:57:22 AM »
+14
Working on two very different projects this week.

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

shark_jj

  • Crew
  • *
  • Posts: 292
  • Respect: +644
Re: Weekend Update 9/29/24
« Reply #5 on: September 28, 2024, 11:13:35 AM »
+2
Love that ex Erie Lackawanna unit Ed.  Some of my favorite railfanning memories are the Curve in the mid to late 70's when Conrail had that rainbow blend of units.  Hard to believe that will soon be 50 years ago.

« Last Edit: September 28, 2024, 11:15:23 AM by shark_jj »
John

NorthWestGN

  • Crew
  • *
  • Posts: 54
  • Gender: Male
  • Respect: +84
Re: Weekend Update 9/29/24
« Reply #6 on: September 28, 2024, 11:26:52 AM »
+4
The green chain looks great painted Sumner, nice of you to offer the files. I’ll have some lumber operations on my layout but no room for a detailed production line…

Lee , did you apply the dry transfers directly onto the ribbed car side? I gave up on that after wasting a few sets going that way, now it’s always onto clear decal film first…

Ed, I like the attaché  DCC case, I assume the red and yellow are the colour keys for the front & rear T Trak tracks, with a selection for either DC or DCC for each? The former EL repaint looks great…

I came up with what I hope is my final track plan, any further and I’m approaching spaghetti bowl, plus I’m too frugal to not use all the Peco turnouts I bought used years ago…




Brent

Lemosteam

  • Crew
  • *
  • Posts: 5884
  • Gender: Male
  • PRR, The Standard Railroad of my World
  • Respect: +3555
    • Designer at Keystone Details
Re: Weekend Update 9/29/24
« Reply #7 on: September 28, 2024, 03:22:16 PM »
+11
Finalizing the design of a Bucyrus RB19 excavator based on measurements of the pewter model from Railway Express Agency. I wanted more than one for the layout, and I also wanted them posable for various locations in the aggregate yard.





The idea is to allow various assembled positions of the cab rotation, lift arm, bucket, bucket arm bucket arm trammel, and dump plate; glue them in place, paint and then add cable. All pivoting locations need light hand drilling and short brass or PB pins, or they can just be glued in position.

I am considering offering the file, or print to order.

kiwi_al

  • Crew
  • *
  • Posts: 1400
  • Gender: Male
  • Respect: +403
Re: Weekend Update 9/29/24
« Reply #8 on: September 28, 2024, 03:34:18 PM »
0
Sorry Ed I can't resist. Is the portable DCC setup your MVP and you are calling it done?  :D :D

Sumner

  • Crew
  • *
  • Posts: 332
  • Gender: Male
  • Respect: +674
    • My Home Pages....
Re: Weekend Update 9/29/24
« Reply #9 on: September 28, 2024, 05:32:50 PM »
+6
Also today added some print files for some of the interior items for my sawmill. Didn't know if anyone could use them besides myself and still have a lot more to design.  I've gotten some requests for them so decided to put up what I have.

I'd put up the log lift that lifts the logs from the mill pond and the chains that carry the logs to the mill along with a debarker and debarker building ( HERE ).

I had the chain into the building in that group of print files and have added it again to this group along with the log table, carriage, bandsaw and a couple logs one can print (more coming in the future).  Here are a few images  .....








.... and the link to my web page with more images and info about the items ....

https://1fatgmc.com/RailRoad/UP%20Canyon%20Division/page-221.html


.... and ....

You can find the print files for these parts on thingiverse ( HERE ).

More info on Railwire here....

https://www.therailwire.net/forum/index.php?topic=58562.msg806517#msg806517

Sumner
Working in N Scale ---Modeling UP from late 40's to early 70's very loosely......

Under$8.00 Servo turnout Control --- 3D Printed Model RR Objects -- My Home Page

http://1fatgmc.com/RailRoad/RR Main/Link Page Menu.html

bbussey

  • Crew
  • *
  • Posts: 8873
  • Gender: Male
  • Respect: +4704
    • www.bbussey.net
Re: Weekend Update 9/29/24
« Reply #10 on: September 28, 2024, 05:45:26 PM »
0
Finalizing the design of a Bucyrus RB19 excavator based on measurements of the pewter model from Railway Express Agency. I wanted more than one for the layout, and I also wanted them posable for various locations in the aggregate yard.

It appears someone has resumed 3D-printing in the home shop.  8)
Bryan Busséy
NHRHTA #2246
NSE #1117
www.bbussey.net


Lackawannae8

  • Crew
  • *
  • Posts: 53
  • Gender: Male
  • John O
  • Respect: +14
Re: Weekend Update 9/29/24
« Reply #11 on: September 28, 2024, 07:33:37 PM »
0
Working on two very different projects this week.

(Attachment Link)

(Attachment Link)

im guessing your dad was inspired by my portable system I brought to Strasburg LOL
IG: the_lackawanna_cutoff_n_scale

I build cool things with DCC & Sounds

wm3798

  • Crew
  • *
  • Posts: 16095
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +6365
    • Western Maryland Railway Western Lines
Re: Weekend Update 9/29/24
« Reply #12 on: September 28, 2024, 11:44:02 PM »
+1
Lee , did you apply the dry transfers directly onto the ribbed car side? I gave up on that after wasting a few sets going that way, now it’s always onto clear decal film first…

Brent

Yes.  Direct to paint.  Burnished on with a pointy toothpick.
Lee
Rockin' It Old School

Lee Weldon www.wmrywesternlines.net

CBQ Fan

  • Crew
  • *
  • Posts: 3452
  • Respect: +350
Re: Weekend Update 9/29/24
« Reply #13 on: September 29, 2024, 10:15:07 AM »
0
First print attempt of the REA and USPS complex, consisting of only three pieces due to being rendered on the large build plate of an AnyCubic Proton M3 Max. The brick walls are one of the separate components, so all the parts can be airbrushed their base paint colors – Liquitex burnt red for the brick and Tru-Color Hunter green for the slatted walls. There are some minor issues that I will change if these need to be reprinted, but it appears that I will be able to move forward with these prints. I think I’m going to build it on a styrene base which then will be inset in place on the layout.





I would think that there would be a market for this kit.  I would buy one.
Brian

Way of the Zephyr

paggs

  • Crew
  • *
  • Posts: 34
  • Gender: Male
  • Respect: +68
Re: Weekend Update 9/29/24
« Reply #14 on: September 29, 2024, 11:31:39 AM »
+6
Worked on finishing my East Rutherford T-Trak module this weekend.