Author Topic: Horwich Locomotive Works in the UK  (Read 215 times)

0 Members and 1 Guest are viewing this topic.

rogerfarnworth

  • Crew
  • *
  • Posts: 261
  • Respect: +49
Horwich Locomotive Works in the UK
« on: July 20, 2024, 08:54:11 AM »
0
For a number of years in the 1920s and possibly also the 1930s my grandfather worked as a blacksmith in Horwich Loco Works. The works have always, as a result, had a specific interest for me. It has been somewhat saddening over the years to see their gradual deterioration and eventual closure.

In November 2019 I finished reading Issue No. 27 of the Railway Archive Journal published by Black Dwarf Lightmoor Press of Lydney, Gloucestershire.

I enjoyed reading Jeff Wells article in the journal about the Manchester Exhibition of 1887. [1] The article highlights a number of railway exhibits on display at the exhibition. Among these exhibits was 'Dot' a Beyer Peacock 1ft 6 inch gauge 0-4-0T engine. 'According to the official catalogue, Dot was 'specifically built for working on tramways in yards and workshops, and also adopted for tail-rope shunting of ordinary wagons'. After the exhibition, Dot found work at the L&YR's Horwich Works, joining two other Beyer, Peacock 18 in engines, Wren and Robin, which had arrived in April 1887. Such engines were considered necessary to convey materials around the seven miles of internal works' railway.'

http://rogerfarnworth.com/2019/11/30/horwich-loco-works-18-gauge-railway-part-1

Horwich Locomotive Works "was the last major British railway works to be established on a green field site. There were traditionally very strong links between the Lancashire & Yorkshire and London & North Western railways, and John Ramsbottom, late of the LNWR was in 1883 appointed consultant to the LYR regarding the planning of Horwich Works. He advocated an 18in gauge internal transport system similar to that he had earlier installed at Crewe. Originally extending to 7½ miles, this enjoyed a longer life as the last surviving locomotive built for it, 'Wren', was not retired until 1962. The system was used for moving components around the works."

rogerfarnworth

  • Crew
  • *
  • Posts: 261
  • Respect: +49
Re: Horwich Locomotive Works in the UK
« Reply #1 on: July 20, 2024, 08:57:25 AM »
0
Railway World magazine in early 1965 carried a two part article about Horwich Locomotive Works.

I always take note of articles about the Works when I find them, as my paternal grandfather worked there in the early years of the 20th century, before the great depression when eventually he moved his family to Stapleford in the Derby/Nottingham area and where he took a job at the Loco Works in Derby as a blacksmith.

http://rogerfarnworth.com/2024/07/15/horwich-locomotive-works-again/