Thought I'd post this page about the HandCab to see if anyone here is printing as a business and would maybe be interest in printing the HandCab parts for individuals who don't have a printer. You can go to either of the two links and see what the parts are that need printing. If interested please contact me.
===============================================================================
I got the print files up on thingiverse.com here....
https://www.thingiverse.com/thing:6667946...for the HandCab.
NOTE: If you are printing or having a print service print the parts using a resin printer they need to be printed with a resin that 'is not brittle' as a number of the parts will need to be drilled, tapped and need to be strong. I use Siraya Tech 'Build' Sonic Gray and highly recommend it works. It can be drilled, tapped, has great detail and isn't brittle. I use it for even small parts that have a lot of detail. It is basically the only resin I use as it works so well regardless of the application.
Also if you have a printing service print make sure they are keeping the wall thicknesses on the parts as designed. You don't want parts like the handles hollowed out to save a buck or two.
Above are all the main parts minus three small brackets that will be shown later. The case top, middle and bottom were printed on an Ender 3 Pro filament printer with the control stand pieces printed with an AnyCubic Photon M3 resin printer. You could probably print all with either printer. I did it this way as I didn't need supports for the main case parts and using supports made the resin prints easier to setup and print.
Following are images from designing with Fusion 360.
More images and info here ......
https://1fatgmc.com/RailRoad/DCC/page-16.html
Print files on thingiverse.com .....
https://www.thingiverse.com/thing:6667946Also looking for individuals/businesses that want to be a source for the electrical parts.Sumner
