Author Topic: Sharpie for highlights  (Read 1135 times)

0 Members and 1 Guest are viewing this topic.

nickelplate759

  • Crew
  • *
  • Posts: 3791
  • Respect: +1520
Sharpie for highlights
« on: January 29, 2021, 07:20:56 PM »
0
I'm doing a project to decorate a car with cast-on details, including grabs and ladders.  The car is silver, but the grabs, ladders, and a few other things should be black.  It's N-scale, so masking is problematic for things like this.   I think I can do a decent job by painting the car silver then doing the details with a black Sharpie.  If that works out, what's a good clear-coat to seal it?  I recall that Sharpies are alcohol-soluble.
George
NKPH&TS #3628

I'm sorry Dave, I'm afraid I can't do that.

wazzou

  • Crew
  • *
  • Posts: 6812
  • #GoCougs
  • Respect: +1736
Re: Sharpie for highlights
« Reply #1 on: January 29, 2021, 07:30:09 PM »
0
In my experience, Sharpie has a little bit of a purple-ish hue to it, but with that said, you need to be very careful sealing it with whatever you decide to use because it will run if wet too much.
Bryan

Member of NPRHA, Modeling Committee Member
http://www.nprha.org/
Member of MRHA


Angus Shops

  • Crew
  • *
  • Posts: 819
  • Respect: +290
Re: Sharpie for highlights
« Reply #2 on: January 29, 2021, 07:47:17 PM »
0
Sounds like a good idea worthy of an experiment. I’ve used Sharpies, both black and silver, to simulate the gaskets on passenger car windows; works very well. I can’t remember if I’ve over sprayed the car with anything AFTER the window install though...

peteski

  • Crew
  • *
  • Posts: 35224
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6620
    • Coming (not so) soon...
Re: Sharpie for highlights
« Reply #3 on: January 29, 2021, 08:36:05 PM »
0
Yes black Sharpie is actually very dark purple, and yes, Sharpie inks will run when coated with any solvent-based clear (like Dull- or Gloss-cote).  Maybe some water-based acrylic clear or Future (whatever it is called this week) would not make it run.

Maybe there are some felt-tip paint markers (that use "real" paint) that would be suitable for this task?
. . . 42 . . .

wazzou

  • Crew
  • *
  • Posts: 6812
  • #GoCougs
  • Respect: +1736
Re: Sharpie for highlights
« Reply #4 on: January 29, 2021, 09:08:11 PM »
0
@nickelplate759
I'd just get a 3/0 round brush and hand paint the ladders and grabs.
Bryan

Member of NPRHA, Modeling Committee Member
http://www.nprha.org/
Member of MRHA


nickelplate759

  • Crew
  • *
  • Posts: 3791
  • Respect: +1520
Re: Sharpie for highlights
« Reply #5 on: January 29, 2021, 09:13:40 PM »
0
@nickelplate759
I'd just get a 3/0 round brush and hand paint the ladders and grabs.

Yeah, that was my first thought too.  I'm not so good with a brush, and am looking for something more rigid I can control more easily.
George
NKPH&TS #3628

I'm sorry Dave, I'm afraid I can't do that.

dem34

  • Crew
  • *
  • Posts: 1879
  • Gender: Male
  • Only here to learn through Osmosis
  • Respect: +1448
Re: Sharpie for highlights
« Reply #6 on: January 29, 2021, 10:15:43 PM »
0
Yeah, that was my first thought too.  I'm not so good with a brush, and am looking for something more rigid I can control more easily.

A few art companies make super fine black paint pens. Bit more then sharpies and I don't know which ones won't run when coated but it'll at least be true black.
-Al

MK

  • Crew
  • *
  • Posts: 4341
  • Respect: +947
Re: Sharpie for highlights
« Reply #7 on: January 29, 2021, 11:17:31 PM »
+2
Use a Sharpie Ultra Fine point OIL BASED paint marker.  Pure black and since it's paint, no need for protective coat.

https://www.amazon.com/Sharpie-Oil-Based-Paint-Marker-Extra/dp/B00WL2NDJU/
« Last Edit: January 29, 2021, 11:20:27 PM by MK »