Author Topic: Concrete sidewalk size  (Read 4714 times)

0 Members and 1 Guest are viewing this topic.

milw12

  • Crew
  • *
  • Posts: 375
  • Respect: +335
Re: Concrete sidewalk size
« Reply #30 on: September 26, 2017, 08:10:35 PM »
0
Ed, I was in the same boat not that long ago. I was trying for older sidewalks in industrial areas, so a little more narrow and small. 3/8", while most correct with my measurements, it struck my eye as too large, 3/16" too small. I went with 1/4" square, .040" square curbs, Model Master aircraft grey and India Ink for color:





I'd agree with what you are doing in an urban area that multiple sizes would be best, looking forward to the results!

Lucas

nkalanaga

  • Crew
  • *
  • Posts: 10577
  • Respect: +1755
Re: Concrete sidewalk size
« Reply #31 on: September 27, 2017, 01:47:19 AM »
0
Lucas:  Looks about right for many older residential sidewalks I've seen, in both Pasco and Kentucky.  It isn't unusual for one person to step off the concrete if two people meet.

N Kalanaga
Be well

Carolina Northern

  • Crew
  • *
  • Posts: 226
  • Gender: Male
  • Respect: +38
Re: Concrete sidewalk size
« Reply #32 on: September 27, 2017, 04:01:36 PM »
0
Looks good to me. Think that's how I'll do it. Getting close to needing to put down some sidewalk (LPP  are getting tired of walking in the street).


Don

OldEastRR

  • Crew
  • *
  • Posts: 3783
  • Gender: Male
  • Respect: +512
Re: Concrete sidewalk size
« Reply #33 on: September 28, 2017, 05:40:56 AM »
0
Not really sure if you need to scribe or have lines molded into the concrete. I use .o4o" styrene sheet cut into whatever width I need for the sidewalk. I use 6 scale foot wide strips for everywhere, tho I could see having a 10' wide sidewalk in the retail districts. At least for the fronts of the stores -- the sidewalks going along the side walls at the end of the block could be narrower.
I don't have any joint lines in the strips and you don't really notice they're not there. But painting a single square a different color (where the sidewalk was replaced) gives the illusion of joints in the whole thing. And chopping out a square and replacing it with a broken up or tilted slab is another quick way to make it look realistic.

JMaurer1

  • Crew
  • *
  • Posts: 1188
  • Gender: Male
  • Respect: +307
Re: Concrete sidewalk size
« Reply #34 on: September 28, 2017, 12:21:17 PM »
0
Also sidewalks, just like roads, do no weather evenly. Streaks and/or blotches of slightly different colors will make the sidewalk look older and used.
Sacramento Valley NRail and NTrak
We're always looking for new members

R L Smith

  • Crew
  • *
  • Posts: 809
  • Respect: +846
Re: Concrete sidewalk size
« Reply #35 on: September 28, 2017, 12:57:20 PM »
+2


In the grand scheme of things, nobody notices, and nobody cares.

Lee


 ...except on the Railwire......   :facepalm:
ELHS and NMRA member

If the women don't find you handsome, make sure they find you handy...

mmyers

  • The Pitt
  • Crew
  • *
  • Posts: 1008
  • Respect: +51
Re: Concrete sidewalk size
« Reply #36 on: September 28, 2017, 08:05:44 PM »
0
Good thing the Rain Tax was repealed.

DeltaBravo

  • The Pitt
  • Crew
  • *
  • Posts: 666
  • Gender: Male
  • Respect: +250
    • N-Scale and other interest
Re: Concrete sidewalk size
« Reply #37 on: September 29, 2017, 03:10:16 PM »
0
Ed, we used the 1/4 inch on my layout and used PollyScale Concrete for the paint. I am with Lee though on this no one will notice if you weather them up and add some trash and crap.
David B.
 
Member WMRHS

https://undara.wordpress.com/