Author Topic: Sss Chet and Billybob's Butchers  (Read 3144 times)

0 Members and 1 Guest are viewing this topic.


  • Crew
  • *
  • Posts: 275
  • Gender: Male
  • Charter member of CAMRRA
  • Respect: +73
Sss Chet and Billybob's Butchers
« on: December 17, 2014, 11:06:51 PM »

Back to basics with this ultra easy build. With the novice builder in mind, I designed this as a butcher shop, but it can be ANY type of small business or office. With the display tables behind the plate glass windows, you can fill them with whatever your shop is going to sell. The large space above the front door is ideal for creating your own personalized signage. This is my own design with a footprint of 1 1/4 x 1 1/2. If you don’t like the colors, you can paint as desired. There are parts templates to print so you can save measuring steps.

Choice of materials is up to you. It can be done in wood but sketches are based on styrene thicknesses. If you use another material adjust dimensions accordingly. Paint parts before assembly, except where the edges glue to other parts.

The building directions and materials are in the sketches, and to make your build easier you can enlarge them to full size and print them out. Read directions in assembly sketches before cutting out parts as you may want to change some sizes or cut fewer, or additional, openings. Included sketches are: Overview sketches, Parts templates,  Assembly sketches,  and PDF's.

To print the part templates actual size, use the PDF's. Select best printer quality, set PDF zoom to 100%, and page scaling to "none" or actual size. Check your printed page to see that 3" lines are exactly 3" long. Once you have template printed, you can cut with scissors (leave a 1/8" border) and arrange on your material for maximum sheet usage. Part templates for siding are a mirror image, when needed, so that you can cut walls with siding side down (easier to cut). Be sure siding grooves are oriented correctly. Use rubber cement or Krylon Easy Tack Repositionable Adhesive to glue paper templates to your material and then just cut on lines. No measuring ! Paper comes off easily.

Cut out parts carefully using a SERB and straight edge. The best way to cut out window openings is with a corner punch. It is important to follow assembly sketches IN SEQUENCE or some parts may not fit.

Roofing material is your choice but if you want to print your own a template is included.

To see all of my completed Sketch sets in one place go here: