Author Topic: Marina boat storage Sss  (Read 3406 times)

0 Members and 1 Guest are viewing this topic.

gary60s

  • Crew
  • *
  • Posts: 275
  • Gender: Male
  • Charter member of CAMRRA
  • Respect: +71
Marina boat storage Sss
« on: October 25, 2013, 11:42:34 AM »
0
Thanks to Rob(N_scale_crazy) for suggesting it, here is a set of sketches for making a marina boat storage building. It features 16 racks for storing boats in the 25' long or less range, and 56 racks for boats 20' long or less. Boat insertion is made with a modified fork lift. Footprint is 3" x 5 3/8". Design is modified from basic marine storage systems.

If you don’t like the colors, you can paint as desired. There are parts templates to print so you can save measuring steps.

Choice of materials is up to you. It can be done in wood but sketches are based on styrene thicknesses. If you use another material adjust dimensions accordingly. Paint parts before assembly, except where the edges glue to other parts.

The building directions are in the sketches, and to make your build easier you can enlarge them to full size and print them out. Read directions in assembly sketches before cutting out parts as you may want to change some sizes or cut fewer, or additional, openings.

Included sketches are: Overview sketches, Parts templates,  Assembly sketches,  and PDF’s.

To print the part templates actual size, use the PDF's. Select best printer quality, set PDF zoom to 100%, and page scaling to "none" or actual size. Check your printed page to see that 3" lines are exactly 3" long. Once you have template printed, you can cut with scissors (leave a 1/8" border) and arrange on your material for maximum sheet usage. Part templates for siding are a mirror image, when needed, so that you can cut walls with siding side down (easier to cut). Be sure siding grooves are oriented correctly. Use rubber cement or Krylon Easy Tack Repositionable Adhesive to glue paper templates to your material and then just cut on lines. No measuring ! Paper comes off easily.

Cut out parts carefully using a SERB and straight edge. It is important to follow assembly sketches IN SEQUENCE or some parts may not fit.





































PDF links:
https://www.dropbox.com/s/jgrl1mdym6y5riy/smsbpt1pdf.pdf
https://www.dropbox.com/s/erx83vxcu2qjzz6/smsbpt2pdf.pdf
https://www.dropbox.com/s/u2m42ktg4gcyzfg/smsbpt3pdf.pdf



Gary