Author Topic: Lewis Station Sss  (Read 4102 times)

0 Members and 1 Guest are viewing this topic.

gary60s

  • Crew
  • *
  • Posts: 275
  • Gender: Male
  • Charter member of CAMRRA
  • Respect: +71
Lewis Station Sss
« on: October 24, 2013, 03:35:31 PM »
0
Thanks to Lew(Samarian) for providing the picture, I was able to make a set of sketches for a combination freight/passenger station. The footprint is 7/8" by 2". Paint parts before assembly, except where the edges glue to other parts.

The building directions are in the sketches, and to make your build easier you can enlarge them to full size and print them out. Read directions in assembly sketches before cutting out parts as you may want to change some sizes or cut fewer, or additional, openings.

Included sketches are: Overview sketch, Parts templates,  Assembly sketches,  and PDF’s.

To print the part templates actual size, use the PDF's. Select best printer quality, set PDF zoom to 100%, and page scaling to "none" or actual size. Check your printed page to see that 3" lines are exactly 3" long. Once you have template printed, you can cut with scissors (leave a 1/8" border) and arrange on your material for maximum sheet usage. Part templates for siding are a mirror image, when needed, so that you can cut walls with siding side down (easier to cut). Be sure siding grooves are oriented correctly. Use rubber cement or Krylon Easy Tack Repositionable Adhesive to glue paper templates to your material and then just cut on lines. No measuring ! Paper comes off easily.

Follow assembly sketches.













PDF links:
https://www.dropbox.com/s/iz8l094tdvpw2ev/glspt1pdf.pdf
https://www.dropbox.com/s/d8kevo2w0jd91wx/glspt2pdf.pdf
Gary