Author Topic: N Scale Wood Tunnel Portal, Abutments and Retaining Wall  (Read 1302 times)

0 Members and 1 Guest are viewing this topic.

Great Lakes Models

  • Posts: 23
  • Respect: 0
N Scale Wood Tunnel Portal, Abutments and Retaining Wall
« on: April 10, 2013, 01:03:53 PM »
0
Here is our new products.

All work together or can be used by themselves.

 

available at www.greatlakesmodels.com


 

 

Wood Tunnel Portal

N Scale

015 002 387 007

$8.80

1 Portal

 

Measurements:
 Inside: 2.019" High X 1.385" Wide
 Outside: 2.767" High X 2.997" Wide
 
 

Tunnel portals were used around the entrances and exits of tunnels to prevent loose rocks and debris from falling.

You can leave them bare (like newer wood panels) or paint a gray color (like weathered wood).

They are made out of Basswood. For this reason they can also be easily kitbashed into different lengths and hights by using a sharp hobby knife.


Options for use:
1)Tunnel Entrance
 
 

_______________________________________________________________________


 

Wood Right & Left Abutments

N Scale

015 002 387 008

$16.34

1 Right & 1 Left

Measurments: 4.463" Long X 2.769" High

 
 
Abutments were used to the left and/or right of tunnel portals to prevent loose rocks and debris from falling.

Abutments can be used as a stepped retaining wall to hold back loose rocks and dirt.

You can leave them bare (like newer wood panels) or paint a gray color (like weathered wood).

They are made out of Basswood. For this reason they can also be easily kitbashed into different lengths and hights by using a sharp hobby knife


Options for use:
1)Abutment for Tunnel Portal (Matched Tunnel Portal #015 002 387 007)
2)Step Retaining Wall
 

 

_______________________________________________________________________

 

Wood Retaining Wall or Inside Tunnel Wall

N Scale

015 002 387 009


$14.58

1 Wall

Measurements: 2.095" High

 

Retaining walls were used to hold back loose rocks and dirt in a hill cut.

Our retaining walls were created to line up with the Tunnel Portals.

You can leave them bare (like newer wood panels) or paint a gray color (like weathered wood).

They are made out of Basswood. For this reason they can also be easily kitbashed into different lengths and hights by using a sharp hobby knife


Options for use:
1) Retaining Wall on cut in Hill
2) Inside Wall for Tunnel (Matches Wood Tunnel Portal #015 002 387 007)
 

 

 

Great Lakes Models

    www.greatlakesmodels.com

Great Lakes Models

  • Posts: 23
  • Respect: 0
Re: N Scale Wood Tunnel Portal, Abutments and Retaining Wall
« Reply #1 on: April 13, 2013, 08:28:52 AM »
0
Hi everyone

I forgot to mention this in the release.

These are all laser etched basswood kits.


Kevin
Great Lakes Models
www.greatlakesmodels.com