Author Topic: Intermountain Cab forward connector pin  (Read 521 times)

0 Members and 1 Guest are viewing this topic.

Flagler

  • Crew
  • *
  • Posts: 391
  • Respect: +11
Intermountain Cab forward connector pin
« on: February 24, 2013, 10:50:54 AM »
0
The Pin is loose on one of the sets of drivers,This appears to cause one of the rods to spin around and almost touch the road bed. Are this pins press fit.Can the connection be improved so it matches the others on the engine,They are tight not loose fitting

Flagler

  • Crew
  • *
  • Posts: 391
  • Respect: +11
Re: Intermountain Cab forward connector pin
« Reply #1 on: February 24, 2013, 12:04:09 PM »
0
The engine is Fixed, I pushed the connector pin all the way in and I now have a tight fit.The rods are working correctly.
You could see  that the pin was slightly raised and not all the way in when compared to the others.It took some pressure to push it all the way in.