Author Topic: Question for static grass experts  (Read 4959 times)

0 Members and 1 Guest are viewing this topic.

mark.hinds

  • Crew
  • *
  • Posts: 499
  • Gender: Male
  • Respect: +82
Question for static grass experts
« on: May 06, 2011, 04:05:59 PM »
0
I’m not at the scenery stage yet, but here’s an advance question for someone.  

The image below is typical of what one sees when looking east on my prototype between my first and second scenes.  If I remember correctly, the grass is pretty long; at least up to mid-calf.  (This is California disturbed-area dry-season vegetation).  I have a 3” to 4” deep section between my main line and my backdrop to fill.  





Do any of you static grass experts think that this could be done with static grass (suitably jazzed up)?  

An alternative would be something like Silflor grass matts:  http://www.sceneryexpress.com/departments.asp?dept=1040 .  

<EDIT to add estimate of the height of the grass and add 2nd image>

MH
« Last Edit: May 07, 2011, 09:38:48 AM by mark.hinds »

Ian MacMillan

  • Global Moderator
  • Crew
  • *
  • Posts: 12034
  • Gender: Male
  • Learn to use the god damn search feature!
  • Respect: +167
    • Conrail's Amoskeag Northern Division
Re: Question for static grass experts
« Reply #1 on: May 06, 2011, 04:10:38 PM »
0
Oh hell yes it can. you can do a base layer,and then once that dries use some different lengths and add an additional layer to build up the higher areas. The Silfor Cow Pastures will make it easier, but depending on the amount of space you need to cover, may not be cost effective compared to doing it yourself with static Silfor grass.
I WANNA SEE THE BOAT MOVIE!

Yes... I'm in N... Also HO and 1:1

Philip H

  • Crew
  • *
  • Posts: 9030
  • Gender: Male
  • Respect: +1797
    • Layout Progress Blog
Re: Question for static grass experts
« Reply #2 on: May 06, 2011, 04:28:06 PM »
0
You can definitely do it. Depending in the grass height you are after you probably need some mix of 2mm and 4mm grass. Both Woodlans Scenics and Silflor have appropriate colors in those sizes.

My guess from the photo is mosttly 2mm with a smattering of 4mm grass and some 4mm Prairie Tufts in a matching color.
Philip H.
Chief Everything Officer
Baton Rouge Southern RR - Mount Rainier Division.


mark.hinds

  • Crew
  • *
  • Posts: 499
  • Gender: Male
  • Respect: +82
Re: Question for static grass experts
« Reply #3 on: May 06, 2011, 04:31:59 PM »
0
Thanks for the feedback.  No static grass when I first tried this back in 1982.  Seems to be a very nice additional option.   :)

MH

Dave Schneider

  • Crew
  • *
  • Posts: 2377
  • Respect: +51
Re: Question for static grass experts
« Reply #4 on: May 06, 2011, 04:32:16 PM »
0
Jamie/Lashedup has produced a great figure with some of the available static grass types. I looked for it but couldn't find it. Maybe he will weigh in on this topic at some point. The Mod-U-Trak guys are serious static grass pushers!

Best wishes, Dave

Edit: Found it!
http://therailwire.net/forum/index.php/topic,22662.15.html

Another good grass thread:
http://therailwire.net/forum/index.php/topic,15108.0.html
« Last Edit: May 06, 2011, 05:05:05 PM by Dave Schneider »
If you lend someone $20, and never see that person again, it was probably worth it.

MichaelWinicki

  • Crew
  • *
  • Posts: 2096
  • Respect: +335
Re: Question for static grass experts
« Reply #5 on: May 06, 2011, 04:45:37 PM »
0
Looks like a job for the Scenic Express "California Golden Grass"...

http://www.sceneryexpress.com/products.asp?dept=1126

skytop35

  • Crew
  • *
  • Posts: 813
  • Respect: +922
Re: Question for static grass experts
« Reply #6 on: May 06, 2011, 04:57:04 PM »
0
The Mod-U-Trak guys are serious static grass pushers!

Good thing the word STATIC appears in that sentence!
Bill Denton

Ian MacMillan

  • Global Moderator
  • Crew
  • *
  • Posts: 12034
  • Gender: Male
  • Learn to use the god damn search feature!
  • Respect: +167
    • Conrail's Amoskeag Northern Division
Re: Question for static grass experts
« Reply #7 on: May 06, 2011, 05:31:13 PM »
0
Jamie/Lashedup has produced a great figure with some of the available static grass types. I looked for it but couldn't find it. Maybe he will weigh in on this topic at some point. The Mod-U-Trak guys are serious static grass pushers!

Best wishes, Dave

Edit: Found it!
http://therailwire.net/forum/index.php/topic,22662.15.html



Forgot about that thread....Added to the "Worst Of"
I WANNA SEE THE BOAT MOVIE!

Yes... I'm in N... Also HO and 1:1

GaryHinshaw

  • Global Moderator
  • Crew
  • *
  • Posts: 6800
  • Respect: +2668
Re: Question for static grass experts
« Reply #8 on: May 06, 2011, 06:58:13 PM »
0
You can definitely pull this scene off with a combination of static grass and Silflor tufts.  My favorite type of blade for California dry grass is the 6mm length from Noch or Silflor.  While 6mm scales out to ~3' in N it doesn't look like that at all when it's applied, whereas I find the shorter lengths look overly trimmed.  (But it's good to mix lengths and colors for variety.)

I don't have any good photos of my last test with this stuff, but here are a few old ones to give you a sense of the color and texture:



(The track here is HO, but don't hold that against me.) 



(The color balance is off on this shot - the first shot is a better rendition of the Noch blade color.)  The center-beam in the background is N scale, so you can see the 6 mm length doesn't look out of place at all.

You should collect several shades and lengths of grass blade, and pick up a variety of Silflor tufts, then make a small diorama where you try to copy the photo you posted.  You'll be very pleased with the results.

-Gary

P.S. I was very dissatisfied with grass mats.  Too uniform, until you reached a seam.

mark.hinds

  • Crew
  • *
  • Posts: 499
  • Gender: Male
  • Respect: +82
Re: Question for static grass experts
« Reply #9 on: May 07, 2011, 09:36:50 AM »
0
<post content removed>
...
P.S. I was very dissatisfied with grass mats.  Too uniform, until you reached a seam.

Apparently there are ways to deal with the uniformity:  http://alkemscalemodels.net/TennPass/InprogressGallery4/index.htm

MH

GaryHinshaw

  • Global Moderator
  • Crew
  • *
  • Posts: 6800
  • Respect: +2668
Re: Question for static grass experts
« Reply #10 on: May 07, 2011, 01:44:46 PM »
0
Bernie's example is certainly outstanding, and I think mats work quite well in a bog scene where there aren't large contiguous regions to be covered.  But I think a field scene like your original shots shows is more convincingly rendered with static grass.  And with the preponderance of sizes and colors available now, it's easier than ever.

-gfh



chuck geiger

  • Crew
  • *
  • Posts: 3593
  • Gender: Male
  • Train Talk Media
  • Respect: +3991
Re: Question for static grass experts
« Reply #11 on: May 07, 2011, 06:47:26 PM »
0
My static grass and homemade fly swatter appliance is across town
at my daughters in storage, so I went with old paint brushes cut to size
and puddles of Tacky Glue for a river bank. I have also seen felt in
matching colors pulled apart and faux fur turned around, glued down
and then cut unevenly to produce various heights of tall grass.

Modeler's who have nailed golden grass:

Joe Fugate
/>
Denny's Coast Line

Oakdale Sub
http://farm6.static.flickr.com/5190/5677901820_c5a0997223_b.jpg

http://www.istockphoto.com/file_thumbview_approve/3140008/2/istockphoto_3140008-golden-grass-background.jpg
http://www.bassimages.com/wildwood/fullsize/fullsize/golden_grass.jpg
« Last Edit: May 07, 2011, 07:01:47 PM by chuck geiger »

Roger Holmes

  • Crew
  • *
  • Posts: 1272
  • Gender: Male
  • Respect: +739
Re: Question for static grass experts
« Reply #12 on: May 08, 2011, 05:31:52 PM »
0
I am thinking of spending some of my eBay proceeds on the Noch unit.  However the areas that I want to cover already have Woodland Scenics FINE ground foam on them.  Can I apply static grass over the existing foam?
Best regards,

Roger

There are 10 kinds of people in the world.  Those who understand the binary system and those who don't.

Philip H

  • Crew
  • *
  • Posts: 9030
  • Gender: Male
  • Respect: +1797
    • Layout Progress Blog
Re: Question for static grass experts
« Reply #13 on: May 08, 2011, 05:35:33 PM »
0
I am thinking of spending some of my eBay proceeds on the Noch unit.  However the areas that I want to cover already have Woodland Scenics FINE ground foam on them.  Can I apply static grass over the existing foam?
Sure can. Just saturate the area with your adhesive of choice and go for it. I think the static over ground foam actually gives some additional texture.

And if you don't want to buy the Noch unit, you can build your own. I did using an article on-line in Model Railroad Hobbyist and haven't killed myself yet!
Philip H.
Chief Everything Officer
Baton Rouge Southern RR - Mount Rainier Division.


Bendtracker1

  • Crew
  • *
  • Posts: 1547
  • Remember The Rock!
  • Respect: +1648
    • The Little Rock Line
Re: Question for static grass experts
« Reply #14 on: May 08, 2011, 07:25:01 PM »
0
Roger,
Here is a video of one that I first found when I was looking into it.  Bare in mind, the video is kind of rough, the guy did it kind of a hurry, but it could be easily modified.
It at least give you the basic idea.  Do a search on Youtube, there are several other possibilities.

http://www.youtube.com/watch?v=EAEmcqc-yIc&feature=related

I haven't had time to try it yet, but have plans too...now that most of my track work is done!   ;)
Allen