« previous next »
Pages: [1]   Go Down

Author Topic: stripping Delux innovations cars  (Read 1685 times)

0 Members and 1 Guest are viewing this topic.

71jeep

  • Crew
  • *
  • Posts: 254
  • Gender: Male
  • Respect: +8
stripping Delux innovations cars
« on: December 23, 2008, 05:21:58 PM »
0
Hi all..

I was/am attempting to build some X46a cars out of Delux cars like Rich/Ryourstone of this board but am baffled as to how to get these cars stripped??
I have them soaking in cameleon to no avail it took the lettering off but is not touching the paint.I soaked one in brake fluid for about an hour and half no dice.What do I need to do get some industrial strength ???
Soooo anyone out there got any ideas what I could use???

Thanks alot for any help !!

Allen.....
« Last Edit: December 23, 2008, 05:26:37 PM by 71jeep »
Logged

CoalPorter

  • Crew
  • *
  • Posts: 578
  • Respect: 0
Re: stripping Delux innovations cars
« Reply #1 on: March 25, 2009, 11:23:26 PM »
0
Did you try EZ lift off. It has always worked for me, and I've stripped some Delux box cars with it. It doesn't work very well if it's too cold. I found it works best on an 80 degree or more day. Are you working in a shop or garage where it is real cold?
Logged
Positive Trading Post With JustTraincRaZy, Railhead, OldBillIndy, Freighttrain

ryourstone

  • Crew
  • *
  • Posts: 482
  • Respect: +5
Re: stripping Delux innovations cars
« Reply #2 on: March 31, 2009, 03:01:26 AM »
0
I used chameleon too, can't remember how long it took. The paint was very thick so it took a while, several hours at least.
Logged
Pages: [1]   Go Up
« previous next »