Author Topic: T-Trak T-Trak Module Build * Lake Erie Huletts  (Read 1897 times)

0 Members and 1 Guest are viewing this topic.

Laughlin Jones

  • Posts: 20
  • Respect: +17
Re: T-Trak Module Build * Lake Erie Huletts
« Reply #30 on: November 12, 2026, 01:09:27 PM »
+1
@NtheBasement


Appreciate that, I however already own 4 of Pete's huletts. Part of the reason I want to do this build is a tribute. He was really helpful many many years ago while working with him on the hulett project.




arbomambo

  • Crew
  • *
  • Posts: 1557
  • Respect: +1671
Re: T-Trak Module Build * Lake Erie Huletts
« Reply #31 on: November 13, 2026, 05:14:16 PM »
+1
QUESTION FOR THE T-TRAK PEOPLE


 I have looked at the standards a few times, module height 2.75 - 4" 

Now comes the assuming........ Never good!    When set up at an event is the goal to dial all the modules in at a 4" deck height thus building the module to max height would eliminate the ability to adjust it to mate up with the adjacent modules?


Again I do not plan on taking this to a bunch of shows, but would like to ability to take it.


Keep the wheels on the rail,

Laughlin



T-TRAK modules must be adjustable in height (traditionally with leveling bolts) to have the top track deck, the actual deck where the unitrack track bed rests (or whatever track you use between the Unitrack ends) from 2-3/4” up to 4”. This is not the height at the top of the rail, like NTRAK, but, again, the base of the Unitrack.
Don’t deviate from this standard. For this reason, most module boxes are 2-3/4” in height, although they don’t need to be… but don’t make them taller than 2-3/4” or you will not be able to adjust them ‘downward’ to the 2-3/4” minimum height standard.
  T-TRAK modules almost never end up sitting flat on the tables (although I think they look more visually appealing when they’re completely flat on the table. Even slight differences in height between multiple tables, and even in the same table will cause issue if your module isn’t adjustable in height.
In our Southeastern region setups (we have one going on this weekend for the Cordele Railfan Festival), we take great pains to take 15-20 minutes more, micro-adjusting the heights of all the modules in the layout; eliminating dips, rises, etc. until all modules are perfectly relative to each other. Because we do this, we have no issue running any and all equipment with low clearance profiles, up to and including those notorious low ScaleTrains SD-40-2 fuel tanks and the Atlas ultra low plows.
"STILL Thrilled to be in N scale!"

Bruce M. Arbo
CATT- Coastal Alabama T-TRAK
https://nationalt-traklayout.com/


arbomambo

  • Crew
  • *
  • Posts: 1557
  • Respect: +1671
Re: T-Trak Module Build * Lake Erie Huletts
« Reply #32 on: November 16, 2026, 02:43:38 PM »
0
Has there been any progress on this module build? Has anything been started?
"STILL Thrilled to be in N scale!"

Bruce M. Arbo
CATT- Coastal Alabama T-TRAK
https://nationalt-traklayout.com/