New product alert 17: Keystone Details new product update

[Lemosteam]

On the spreadsheet, I have added a new tab called Keystone Details Trucks, where only freight, passenger and caboose trucks are listed with new item numbers. Please use these item numbers when emailing an order.

The first new trucks to be added are the high (A/M-T), medium (KD) and low (BLMA) (all defined here) versions of the ASF A-3 (PRR 2D-F26) friction bearing freight trucks:

Please order by item number via email to keystonedetails@gmail.com

[Lemosteam]

Several new products will be offered soon:

A Micro Trains by Atlas paired window coach arch (balloon) snap in replacement roof.



For the PRR version, a new set of roof detailing vents will also be offered as seen in many proto images that can be used on PRR clerestory roofs, etc. (No pics yet)



Pullman style vents and fans for clerestory roofs: (No pics yet)



PRR style flat and angled messenger vents for B60b messenger baggage cars and B74b Horse cars:





PRR style porthole door overlays for the MT By Atlas 70’ baggage cars.



A High, Medium and Low version of the PRR class 2D-F12 coil-elliptic freight trucks common on many F, G, K, and X PRR class rolling stock. (Image coming soon).



An N Scale First PRR (static) Dwarf and Tombstone signals shown painted in Tamiya grey primer.

Dwarf:


Tombstone:



More product testing soon!

[Mark5]

John, you are cranking out some real goodies! Looking forward to sampling some of the trucks this fall.

Mark

[Lemosteam]

John, you are cranking out some real goodies! Looking forward to sampling some of the trucks this fall.

Mark

Lol. Thanks!  The only new product that I did not have at Shapeways before are the signals and the multi-height trucks.  I have arch roofs for every MT passenger style and I will eventually get to print them unless they are too long got my print volume.

[Dave V]

I’m also going to need an f-ton of 2D-P5 trucks!

[Lemosteam]

@Dave V , Only for the coaches. The B70b used 3C-P1 that I will be designing soon, specifically for this set.

[Dave V]

@Dave V , Only for the coaches. The B70b used 3C-P1 that I will be designing soon, specifically for this set.

Even better!

[Dave V]

@Dave V , Only for the coaches. The B70b used 3C-P1 that I will be designing soon, specifically for this set.

@Lemosteam , the current spreadsdheet shows that the 2D-P5s are for the Lima/Model Power coach. Just wanted to confirm that they will work for MTL and the Hell Gate Models B60b.

[Lemosteam]

Very astute observation @Dave V Lima version dropped the coupler quite a bit.

Printing MT versions now for brief testing and are now added to the worksheet. 

Hellgate versions are also different and will be added soon.

No need for BLI versions, but I also have a design for the Bachmann coach (extra coach that came with a doodlebug a while back) which is almost spot on for a P70 and has electrical contacts.

[Dave V]

No need for BLI versions, but I also have a design for the Bachmann coach (extra coach that came with a doodlebug a while back) which is almost spot on for a P70 and has electrical contacts.

I bought one of those way back when also, before BLI announced a correct P70. That Bachmann car would also be a candidate for a balloon roof... 

[Lemosteam]

The Bli roof cannot be replaced, it would have to be sawed off the sides. I think the Bachmann has a similar fate.

[Dave V]

The Bli roof cannot be replaced, it would have to be sawed off the sides. I think the Bachmann has a similar fate.

LOL, no worries!

[Dave V]

Several new products will be offered soon:

A Micro Trains by Atlas paired window coach arch (balloon) snap in replacement roof.

Doin' some research I'm coming up that these roofs were still exceptionally rare during the steam era... Can other SPFs confirm? They'd be very unlikely to be paired with a coach that didn't have the three stripes...

[James Costello]

Hi John - sent you an email the other day requesting the following:

• Body-mount adapters for the IMRC PS 4750 covered hopper
• underframe detail set for the IMRC SD40-2

With so many npossible conversions happening the body mount adapters would be very welcome by the crowd here I think.

[Lemosteam]

Hi John - sent you an email the other day requesting the following:

• Body-mount adapters for the IMRC PS 4750 covered hopper
• underframe detail set for the IMRC SD40-2

With so many npossible conversions happening the body mount adapters would be very welcome by the crowd here I think.

Pm sent.