Done with my electronics projects for a while. I didn’t like some of the building parts so made some design changes and printed the walls again. I've got more info on all of this on Railwire
( HERE ) so won't post all of that here in the layout party section.
A part of the east wall slides in and out. I’ll be able to have it in or out on the layout for better viewing of the interior detail. Keep in mind this isn’t a commercial kit so don’t expect perfection on how the parts fit together. I worked on the opening for the piece that slides in and out above along with a little work also on that piece with a small file.
I had all of the loading docks and stairs to the doors finished but since I raised the walls and put a footer around the bottom of the walls I’m going to need to do some work on those. That might be about the next step or after working on the roof.
The green chain is done
( HERE ) but I need to do some designing and printing of the posts/beams that holds the roof above the green chain. Hopefully the roof I designed and printed still works.
I’m hoping the roof will still fit fine. If not I’ll make changes and reprint it.
I was messing around with the bandsaw sharpening station a broke the saw, it is 3D printed, so will have to print another one and paint it. Painting another is not something I look forward to . It is tiny
(View Here).
I painted the floors and I’m fairly happy with them. Still need to print
all the equipment that will be attached to them.
A link to this whole build
( HERE ).
Sumner
