Author Topic: Assembling GHQ Kits  (Read 1457 times)

0 Members and 1 Guest are viewing this topic.

peteski

  • Crew
  • *
  • Posts: 32865
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5289
    • Coming (not so) soon...
Re: Assembling GHQ Kits
« Reply #15 on: August 01, 2023, 01:28:37 PM »
+2
If I couldn't use CA and accelerator I would abandon my hobbies.  Call it addiction if you want, but CA+ACelerator  rocks my world.

But there are accelerators, and accelerators.  I have tried about half a dozen brands over the years. Some work better than others. Some are slower or faster acting, and some (like Zip-Kicker  for example) will attack styrene (which is what I bond most of the time).

At this point I have settled on the BSI accelerator as my favorite.  Very low odor, does not evaporate too fast, and it is slower acting than other brands.
The way I use it I have not seen any glue joint weakening either.  I should also mention, that the less viscous the CA glue is, the faster will the accelerator kick it over.  I also never spray the accelerator - I use Micro Brushes to apply it.



. . . 42 . . .