Author Topic: Brunel Models order to USA  (Read 557 times)

0 Members and 1 Guest are viewing this topic.


  • Crew
  • *
  • Posts: 5709
  • Gender: Male
  • Respect: +302
Brunel Models order to USA
« on: July 12, 2022, 04:58:44 PM »
Next week or so I plan on sending an order to Brunel ( for some corrugated iron makers.  The shipping from Australia to Oregon is going to run $26.50 minimum and ranges into the mid $30 range as I complete my order.  I am wondering if anyone is interested in going in on an order to split the Aussie postal service costs to the US.  Once items arrive, I would send them out via USPS Priority flat rate. Most of the stuff will fit in a cardboard envelope, which state-side shipping is $8.95; so depending on how many folks want to order (X), per person shipping will run about $30-40ish / X + $8.95

A consideration - I don't know how quick the orders come from that part of the Pacific rim, but I am due to head to Morocco for a month at the end of August to visit family, so if it doesn't arrive before then distribution won't happen until I get back.  My guess is that won't be an issue.

Anyone interested?
« Last Edit: July 12, 2022, 05:00:22 PM by sirenwerks »
Emergency Manager (Noun)

1. A person who solves problems you can't.

2. One who does precision guesswork based on unreliable data provided by those of questionable knowledge.

See also: wizard, magician, miracle worker

Wolf N Works

  • Crew
  • *
  • Posts: 190
  • Respect: +59
Re: Brunel Models order to USA
« Reply #1 on: July 13, 2022, 01:48:46 PM »
Not sure if this is a viable alternative but if you have a 3d printer these are avail in HO that might scale down and work in N

There is this model that I think is nice, not sure what scale it is maybe be able to scale down

Just thought I throw them out there, there may be N scale ones, have not had too much time to look, and if you are stead fast wanting to order Brunel my apologies for this post


  • Crew
  • *
  • Posts: 6229
  • #GoCougs
  • Respect: +1314
Re: Brunel Models order to USA
« Reply #2 on: July 13, 2022, 03:12:40 PM »
Or, you can order quite a bit of it here for the cost of that AUS shipping and they are in the PNW.

Member of NPRHA, Modeling Committee Member
Member of MRHA

Angus Shops

  • Crew
  • *
  • Posts: 632
  • Respect: +164
Re: Brunel Models order to USA
« Reply #3 on: July 14, 2022, 12:37:12 AM »
I made my own by glueing alternate lengths (about 2 inches) of .10 x .30 and .10 x .40 styrene on edge onto a piece of .40 thick styrene sheet (as a base) to create a form for the corregated steel. This part is about 4 scale feet wide.  I cut off about a 1/8 inch long piece of the laminated strips, which I attached a suitably thick piece of styrene as a handle, to create a ‘rake’ to press strips of 4 foot wide strips of aluminum foil into the corregated sheets. I had to gently file the edges of the ‘rake’ to make sure it didn’t snag the foil sheet, but otherwise it works pretty well.