Author Topic: MTL TBOX Issue  (Read 1018 times)

0 Members and 1 Guest are viewing this topic.

ljudice

  • Crew
  • *
  • Posts: 3359
  • Gender: Male
  • Respect: +239
    • NS/CR Camp Car Models
MTL TBOX Issue
« on: October 19, 2021, 01:12:04 PM »
0
Anyone else notice they don't stay coupled to each other on 24" curves?

The problem is seen on the straight-curve transition - and affects all my TBOXs....
« Last Edit: October 19, 2021, 08:24:55 PM by GaryHinshaw »

John

  • Administrator
  • Crew
  • *****
  • Posts: 13165
  • Respect: +2899
Re: MTL TBOX Issue
« Reply #1 on: October 19, 2021, 01:16:31 PM »
+1
Anyone else notice they don't stay coupled to each other on 24" curves?

Might be the spring in the coupler .

MetroRedLine

  • Crew
  • *
  • Posts: 553
  • Gender: Male
  • Respect: +156
    • Union Pacific Vallealmar Subdivision (Facebook Page)
Re: MTL TBOX Issue
« Reply #2 on: October 20, 2021, 04:11:14 AM »
+1
Anyone else notice they don't stay coupled to each other on 24" curves?

The problem is seen on the straight-curve transition - and affects all my TBOXs....

I have 18" radius curves and they run and stay coupled just fine. Perhaps a puff of Grease 'Em graphite powder into the draft gear boxes to lubricate them?
Under the streets of Los Angeles

Englewood

  • Crew
  • *
  • Posts: 767
  • Respect: +261
Re: MTL TBOX Issue
« Reply #3 on: October 20, 2021, 11:59:37 AM »
+1
Mine have had no issues so far on my 24" curves, although I really don't have much run time on them.

delamaize

  • Crew
  • *
  • Posts: 2359
  • Gender: Male
  • Prairie Line Native
  • Respect: +462
Re: MTL TBOX Issue
« Reply #4 on: October 21, 2021, 01:45:35 PM »
0
Are the coupler boxes held together with screws? If so, try loosening them 1/4 turn, Might help
Mike

Northern Pacific, Tacoma Division, 4th subdivision "The Prarie Line" (still in planning stages)

ljudice

  • Crew
  • *
  • Posts: 3359
  • Gender: Male
  • Respect: +239
    • NS/CR Camp Car Models
Re: MTL TBOX Issue
« Reply #5 on: October 21, 2021, 04:38:21 PM »
0
oddly found issue only arises when coupled A to B ends!


I'll try these tips...