Author Topic: HO etched brass ladder?  (Read 518 times)

0 Members and 1 Guest are viewing this topic.

PJPickard

  • Crew
  • *
  • Posts: 151
  • Respect: +14
HO etched brass ladder?
« on: October 11, 2020, 02:49:32 PM »
0
I have looked for this but can't find one. It is for a watchman's tower and needs to be at least 2.250" long. Also potentially for a kit so would need to get a bunch.

Thanks for any help!

Chris333

  • Crew
  • *
  • Posts: 16835
  • Respect: +4543
Re: HO etched brass ladder?
« Reply #1 on: October 11, 2020, 03:06:56 PM »
0
Does it have to be brass?  I have this set and it gives you a lot of different ladders:
https://www.shop.cvmw.com/StepsLadders-1602.htm

PJPickard

  • Crew
  • *
  • Posts: 151
  • Respect: +14
Re: HO etched brass ladder?
« Reply #2 on: October 11, 2020, 04:22:33 PM »
0
Does not have to be brass, but sadly none of the CV ones are right. It needs to be just a plain straight metal type ladder. In this link the fist pic is what I'm after.

https://www.hillsdalehistoricalsociety.org/railroads-tidbits

Point353

  • Crew
  • *
  • Posts: 3096
  • Respect: +613
Re: HO etched brass ladder?
« Reply #3 on: October 11, 2020, 04:51:44 PM »
0
I have looked for this but can't find one. It is for a watchman's tower and needs to be at least 2.250" long. Also potentially for a kit so would need to get a bunch.
Tomar has several brass ladders in different lengths: https://tomarindustries.com/sigparts.htm
Pictures of two of them here: https://www.trainmastermodels.com/searchresults.asp?Search=tomar+ladder

PJPickard

  • Crew
  • *
  • Posts: 151
  • Respect: +14
Re: HO etched brass ladder?
« Reply #4 on: October 11, 2020, 05:06:28 PM »
0
Hey those Tomar ones should work, thanks!