Author Topic: St Paul - N Scale Milwaukee Road  (Read 3273 times)

0 Members and 1 Guest are viewing this topic.

Bryn

  • Crew
  • *
  • Posts: 81
  • Gender: Male
  • Respect: +172
Re: St Paul - N Scale Milwaukee Road
« Reply #15 on: October 08, 2019, 03:03:20 PM »
+5




A few shots from this afternoon. I've recently started using oil paints for weathering and used the old Atlas box car as a test piece, overall I'm very happy with the long working time and controllability of the oils. The roof was finished with powders and everything sealed in dullcote, I might go back and add some underframe dirt at a later date.





LIRR

  • Crew
  • *
  • Posts: 945
  • Respect: +536
Re: St Paul - N Scale Milwaukee Road
« Reply #16 on: October 11, 2019, 07:00:31 AM »
0
very nice work

nscalbitz

  • Crew
  • *
  • Posts: 390
  • Respect: +43
Re: St Paul - N Scale Milwaukee Road
« Reply #17 on: October 11, 2019, 05:04:56 PM »
0
Agree,
weathering the subtle approach is a great enhancement toward realism, keeping the 'old' car viable  :D
d

Bryn

  • Crew
  • *
  • Posts: 81
  • Gender: Male
  • Respect: +172
Re: St Paul - N Scale Milwaukee Road
« Reply #18 on: October 13, 2019, 01:15:22 PM »
+4
Thank you both  :)

While on a winning streak I decided to upgrade to some Roundhouse boxcar kits to fine tune the techniques.


First the model was given a clean in hot soapy water and mounted on a stand to reduce handing of the model.


Next a few tiny dots of neat red and orange oil paint was applied directly to the model. These were then brushed out smoothly into a film/filter to give various to the stark yellow of the original model.


Once the first layer of oil paints had dried a pin wash of heavily diluted brown oil was added around the raised detail, before it fully dried this was buffed and faded out with a dry brush.


Finally a coat of Dullcote was applied and rust chipping added with a fine tip brush and acrylic paints. The trucks were treated to some weathering powders and sealed with Dullcote.

nscalbitz

  • Crew
  • *
  • Posts: 390
  • Respect: +43
Re: St Paul - N Scale Milwaukee Road
« Reply #19 on: October 13, 2019, 06:44:23 PM »
+1
Finally a coat of Dullcote was applied and rust chipping added with a fine tip brush and acrylic paints. The trucks were treated to some weathering powders and sealed with Dullcote.

Cool- almost too subtle but using the large graphic I see it. I don't use oils but have some powders so may well give it a go following your methods... *bigTHUMBSup*  :lol:
dave

Bryn

  • Crew
  • *
  • Posts: 81
  • Gender: Male
  • Respect: +172
Re: St Paul - N Scale Milwaukee Road
« Reply #20 on: October 14, 2019, 01:50:48 AM »
0
Thanks Dave,

Have a look at this for some inspiration;


Bryn

  • Crew
  • *
  • Posts: 81
  • Gender: Male
  • Respect: +172
Re: St Paul - N Scale Milwaukee Road
« Reply #21 on: October 20, 2019, 03:39:21 PM »
+5


My recent weathering job for the Pigs Eye yard fleet can be found;

https://www.therailwire.net/forum/index.php?topic=48153.0

Bryn

  • Crew
  • *
  • Posts: 81
  • Gender: Male
  • Respect: +172
Re: St Paul - N Scale Milwaukee Road
« Reply #22 on: May 03, 2020, 11:21:45 AM »
+5


A quick trip down Pig's Eye shows a hive of activity today.

amato1969

  • Crew
  • *
  • Posts: 912
  • Gender: Male
  • Respect: +146
Re: St Paul - N Scale Milwaukee Road
« Reply #23 on: May 03, 2020, 11:28:19 AM »
+1
Really nice!

  Frank

Bryn

  • Crew
  • *
  • Posts: 81
  • Gender: Male
  • Respect: +172
Re: St Paul - N Scale Milwaukee Road
« Reply #24 on: May 04, 2020, 03:04:44 PM »
0

Tallmatt

  • Posts: 10
  • Respect: +10
Re: St Paul - N Scale Milwaukee Road
« Reply #25 on: May 07, 2020, 04:13:56 PM »
+1
Good work Mr D.
« Last Edit: May 07, 2020, 05:08:38 PM by Tallmatt »