Author Topic: Scale Train NS gevo horn/bell  (Read 353 times)

0 Members and 1 Guest are viewing this topic.

cgw

  • Crew
  • *
  • Posts: 114
  • Respect: +13
Scale Train NS gevo horn/bell
« on: January 30, 2019, 11:03:05 AM »
0
Question for the NS folks:   When you blow the horn  :facepalm: the bell also engages for a few seconds.  Is this prototypical or is this a miss programming?     The other weird thing I noticed that one ditch light is on the left side is on when the front ditch lights are on is this per NS practice. ?



EL3632

  • Crew
  • *
  • Posts: 55
  • Respect: +56
Re: Scale Train NS gevo horn/bell
« Reply #1 on: January 30, 2019, 07:54:08 PM »
0
The horn/bell synchronization is prototypical, as are the ditchlights flashing when the horn is blown. I am unsure about the second question, as I do not know what you are asking, exactly. Does this ditchlight stay on, or does it not flash?

cgw

  • Crew
  • *
  • Posts: 114
  • Respect: +13
Re: Scale Train NS gevo horn/bell
« Reply #2 on: January 31, 2019, 01:38:39 PM »
0
Loco is moving forward   front ditch light is on.  rear ditch light only the left sides on.    reverse direction rear ditch light on.   left front ditch light on is this normal ns practice.      As far as the bell goes on the geo the bell sounds with the horn.    with the current c39 release only the horn sounds.    is this a ns practice?   When i go rail fanning i do not recall the bell going off when the horn is sounding.