0 Members and 1 Guest are viewing this topic.
Mock up.
I'll be installing a beam below the railing. Note that the caption says "mock up"And the 86' hi cubes are running through there just fine.Lee
Since this is a fantasy bridge (too thin to be realistic), why even use center support? Instead of corrugated cardboard use a piece of 1/16" sheet aluminum. That will be plenty stiff to support the track on the upper level without any support in the middle. Or just use some sort of truss bridge. Those can get away with very thin bases. Never mind - truss on one side only would look really weird.
This is where you’re drawing the “really weird” line????
I'd suggest two single-track tunnel portals, perhaps staggered slightly, and fill in around them with scenery to disguise the situation, since it's now a one-sided bridge.DFF
Except...as Lee's mentioned, clearance between these tracks is a huge problem due both to curvature and equipment length. He won't be able to build a portal that doesn't foul equipment between the tracks.
Lee
Sure he can, if he tries hard enough. I had a single-track tunnel on the Virginia Central, and the curved track contained within the tunnel was in the same ballpark as what Lee's curved track is. If necessary, he can go to a double-track portal and clearance the portal as necessary to make sh!t fit.DFF