Author Topic: N Scale Hi Rail - Retro Hollow Core Door Layout  (Read 262471 times)

0 Members and 1 Guest are viewing this topic.

DKS

  • The Pitt
  • Crew
  • *
  • Posts: 13424
  • Respect: +7027
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1140 on: October 03, 2020, 04:41:02 AM »
0
Yes, as crude as some of it looks today, the Arnold N scale of the 1960s really was top-of-the-line as far as production standards.

Well, I'd argue that Arnold tried to but never quite achieved the production standards of Trix and a couple of others such as Fleischmann. And at the outset, Arnold was as crude as old tinplate, whereas Trix was top-of-the-line right out of the gate; in fact, I believe it was their Minitrix Electric line that probably forced Arnold to adopt higher standards.





But, I am admittedly splitting hairs, and also wasting Lee's bandwidth.

And now back to Hi-Railing.

Point353

  • Crew
  • *
  • Posts: 3770
  • Respect: +928
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1141 on: October 03, 2020, 10:30:09 AM »
0
Well, I'd argue that Arnold tried to but never quite achieved the production standards of Trix and a couple of others such as Fleischmann. And at the outset, Arnold was as crude as old tinplate, whereas Trix was top-of-the-line right out of the gate; in fact, I believe it was their Minitrix Electric line that probably forced Arnold to adopt higher standards.
The ratings assigned by Spookshow don't seem to support the contention that contemporary loco models from Minitrix were superior to those from Arnold Rapido.
Arnold's early Baldwin switcher and EMD F9 locos were relatively crude, but it was not until several years later that Minitrix entered the market.

DKS

  • The Pitt
  • Crew
  • *
  • Posts: 13424
  • Respect: +7027
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1142 on: October 03, 2020, 11:25:30 AM »
+1
Arnold's early Baldwin switcher and EMD F9 locos were relatively crude, but it was not until several years later that Minitrix entered the market.

No argument about the timing of the product releases. I was merely pointing out that Arnold got off to a very rocky start, as compared to Trix, who had an excellent initial product offering.

The ratings assigned by Spookshow don't seem to support the contention that contemporary loco models from Minitrix were superior to those from Arnold Rapido.

With all due respect to Spookshow, we may have assigned different ratings to the respective products had I been building a resource similar to his. I've owned literally hundreds of these locos, and have a different opinion as to their respective quality.

However, I might suggest we start a new thread elsewhere if you wish to continue discussing these products, so as not to take away from Lee's work.

wm3798

  • Crew
  • *
  • Posts: 16589
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +7524
    • Western Maryland Railway Western Lines
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1143 on: October 03, 2020, 06:27:15 PM »
+2
Carry on at will, gentlemen...  I'm playing with real trains this weekend!

Rockin' It Old School

Lee Weldon www.wmrywesternlines.net

PennsyPride

  • Crew
  • *
  • Posts: 66
  • Respect: +1
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1144 on: October 03, 2020, 06:45:39 PM »
+1
Wife and I rode on the Potamac Eagle last Saturday in August.All day trip through the trough. Seen 9 bald eagles that day. The club car was a smooth ride and the meals were great. Hope you had as good a time as we did.

glakedylan

  • Crew
  • *
  • Posts: 1486
  • Gender: Male
  • Give Respect. Expect Respect.
  • Respect: +249
    • Justice Kindness Humbleness —Micah 6.8
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1145 on: October 03, 2020, 08:01:55 PM »
0
sorry, momentarily forgot this was Lees thread
did not mean to post here in respect of his work and sharing
sent PM
PRRT&HS #9304 | PHILLY CHAPTER #2384

wm3798

  • Crew
  • *
  • Posts: 16589
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +7524
    • Western Maryland Railway Western Lines
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1146 on: October 03, 2020, 08:34:13 PM »
0
@PennsyPride We were in the area on business today, so we weren't able to do the trip.  But we stayed in Romney, and by the time we got back to town, we caught the train returning to their depot. 
Looks like a nice run though...  we'll have to come back soon!
Lee
Rockin' It Old School

Lee Weldon www.wmrywesternlines.net

nkalanaga

  • Crew
  • *
  • Posts: 10608
  • Respect: +1775
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1147 on: October 04, 2020, 01:13:32 AM »
0
By "production standards", I was thinking more of the technical side, performance and reliability, than appearance.  Much of their 1960s stuff, at least the American models, was rather crude in appearance, but it ran, and kept running, unlike many of the other manufacturers.

My first "N Scale" was a Lone Star 000 set.  It didn't run well at first, and didn't improve with age.  If I hadn't bought an Arnold FA-whatever a couple years later, I probably would have given up on model trains.  I have two now, both second-hand, and they both run beautifully - on code 80 track.  They hit the spikes on ME code 55, but still run, even with the wheels above the rails half the time!
N Kalanaga
Be well

Point353

  • Crew
  • *
  • Posts: 3770
  • Respect: +928
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1148 on: October 04, 2020, 10:58:33 AM »
0
I've owned literally hundreds of these locos, and have a different opinion as to their respective quality.
"Literally hundreds" of the early Arnold Rapido locos? Wow!
Wish I'd had a few thousand dollars to spend on model trains back then.

CRL

  • Crew
  • *
  • Posts: 2345
  • Needs More Dirt.
  • Respect: +643
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1149 on: October 04, 2020, 01:07:03 PM »
0
I have two now, both second-hand, and they both run beautifully - on code 80 track.  They hit the spikes on ME code 55, but still run, even with the wheels above the rails half the time!

Running the old large flange wheels on ME code 55 track is the model railroad equivalent of putting a playing card in the spokes of your bike.

However, Peco code 55 track lacks the fake spikes on the inside of the rail so the large flanges will typically run fine on the Peco track.

nkalanaga

  • Crew
  • *
  • Posts: 10608
  • Respect: +1775
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1150 on: October 04, 2020, 02:13:14 PM »
0
Oh, they run very well on the Peco track in my staging yard, and I have NWSL wheels if I ever decide to upgrade the locos.  What surprised me was that, in spite of visibly bouncing on the spikes on the ME track, they still ran very smoothly!  No contact problems at all, in spite of only touching the rails part of the time, and they were slower than my Katos.

If I do upgrade them, I think I'll use them on a track cleaning train.  As well as they run on dirty track, with intermittent contact, they should be perfect for the job.

Off topic, but in the mid 70s, I converted one to run off overhead wire, just to prove to the local hobby shop owner that an N scale electric would work.  Made a "bow" collector for the roof, from a block of wood for an insulator, a piece of bent wire for the collector, and a rubber band.  That was wired to the PC board Arnold used as the floor, with the truck contacts insulated on one side with paper.  The wire was a length of brass wire, held up by wooden dowels.  No attempt at scale appearance, just to prove to him (an O scale modeler) that an N scale electric would work.  European manufacturers had been making them for years, so I don't know why he didn't believe it! 
« Last Edit: October 04, 2020, 02:16:59 PM by nkalanaga »
N Kalanaga
Be well

wm3798

  • Crew
  • *
  • Posts: 16589
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +7524
    • Western Maryland Railway Western Lines
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1151 on: October 10, 2020, 10:59:41 PM »
+3

Looks like I've been discovered!  I've been enjoying Roy's show for a while.  He's sort of the Mr. Rogers of model railroading.  Check it out.  I better get to work on the next episode!

Lee
Rockin' It Old School

Lee Weldon www.wmrywesternlines.net

peteski

  • Crew
  • *
  • Posts: 35427
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6693
    • Coming (not so) soon...
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1152 on: October 12, 2020, 06:18:43 PM »
0
Sweet!
. . . 42 . . .

glakedylan

  • Crew
  • *
  • Posts: 1486
  • Gender: Male
  • Give Respect. Expect Respect.
  • Respect: +249
    • Justice Kindness Humbleness —Micah 6.8
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1153 on: October 12, 2020, 06:37:11 PM »
+1
Roy has been a fixture on FB fir some time now
his videos have shared many interesting things,
and, yes, in a Mr. Roger's persona.
that is what i like about him...couldn't put my finger on it
until you named it. but yes, that is it!
glad he included your work.


kudos!
Gary
PRRT&HS #9304 | PHILLY CHAPTER #2384

wm3798

  • Crew
  • *
  • Posts: 16589
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +7524
    • Western Maryland Railway Western Lines
Re: N Scale Hi Rail - Retro Hollow Core Door Layout
« Reply #1154 on: October 17, 2020, 09:26:02 AM »
+3

Some more high voltage entertainment..
Rockin' It Old School

Lee Weldon www.wmrywesternlines.net