Author Topic: EBIT posts on A board/LL SW's?  (Read 1024 times)

0 Members and 1 Guest are viewing this topic.

Joetrain59

  • Crew
  • *
  • Posts: 1403
  • Gender: Male
  • Respect: +44
EBIT posts on A board/LL SW's?
« on: April 13, 2016, 02:17:11 AM »
0
Ebit had come up with a way for a cab end light for the LL SW's, and a better power pick-up method. I searched the Atlas N forum, but could not find the posts. Does anyone remember them?
 Joe D

Missaberoad

  • Crew
  • *
  • Posts: 2494
  • Gender: Male
  • Respect: +458
Re: EBIT posts on A board/LL SW's?
« Reply #1 on: April 13, 2016, 02:45:09 AM »
0
Not ebits post but here is a SW rear light conversion, that from what I can tell borrows from his method. (you can even still see the pictures if you still have a Atlas login)
http://forum.atlasrr.com/forum/topic.asp?ARCHIVE=true&TOPIC_ID=34016

Here is his post about the contacts... Unfortunately the picture is missing and he makes reference to it.  :|
http://forum.atlasrr.com/forum/topic.asp?ARCHIVE=true&TOPIC_ID=44798

Hopefully this helps a little...
Ryan in Alberta

peteski

  • Crew
  • *
  • Posts: 21531
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +2008
    • Coming (not so) soon...
Re: EBIT posts on A board/LL SW's?
« Reply #2 on: April 13, 2016, 03:10:30 AM »
0
No need to login - just click on the attachment links and they come right up.
I wish EBIT was here.  :(
--- Peteski de Snarkski

-"Look at me, I'm satirical!!!"
-"Look at me, I'm anal retentive!!!"
-"Look at me, I have the most posts evahhhh!!!"
-"Look at me, I'm snarky!!!!"
-"Look at me, I have OCD!!!"
-"Look at me, I'm a curmudgeon!!!!"
-"Look at me, I'm not negative, just blunt and honest!!!"

Joetrain59

  • Crew
  • *
  • Posts: 1403
  • Gender: Male
  • Respect: +44
Re: EBIT posts on A board/LL SW's?
« Reply #3 on: April 13, 2016, 11:01:45 PM »
0
Wow, old times. :)   Ebit had a rear light method with Pb strips glued to rear cab glazing. Bent at bottom to contact frame, after paint was scraped off.  He already had a SM led and resistor wired across Pb strips before gluing to glazing.
 Wish that pic of contact strip was on A board.
 Thank,
 Joe D

Yes, I too wish Ebit was here.

Bill H

  • Crew
  • *
  • Posts: 337
  • Gender: Male
  • Respect: +36
Re: EBIT posts on A board/LL SW's?
« Reply #4 on: April 17, 2016, 07:16:29 PM »
0
Not ebits post but here is a SW rear light conversion, that from what I can tell borrows from his method. (you can even still see the pictures if you still have a Atlas login)
http://forum.atlasrr.com/forum/topic.asp?ARCHIVE=true&TOPIC_ID=34016

Ryan:
As the post on the old A board clearly indicates and as the person who actually did the work, I did not borrow anything from Ebit's method. Nothing. Not even close, or as I stated in the post, I had not even seen Ebit's method. Nonetheless, as many others have remarked, I really do miss his posts. Where is he posting now or does anyone know why he stopped posting?

Kind regards,
Bill (Bil Hebb)

Missaberoad

  • Crew
  • *
  • Posts: 2494
  • Gender: Male
  • Respect: +458
Re: EBIT posts on A board/LL SW's?
« Reply #5 on: April 17, 2016, 07:23:20 PM »
0
Ryan:
As the post on the old A board clearly indicates and as the person who actually did the work, I did not borrow anything from Ebit's method. Nothing. Not even close, or as I stated in the post, I had not even seen Ebit's method. Nonetheless, as many others have remarked, I really do miss his posts. Where is he posting now or does anyone know why he stopped posting?

Kind regards,
Bill (Bil Hebb)

Absolutely my mistake, and some great modeling none the less...
Ryan in Alberta

Bill H

  • Crew
  • *
  • Posts: 337
  • Gender: Male
  • Respect: +36
Re: EBIT posts on A board/LL SW's?
« Reply #6 on: April 17, 2016, 07:42:58 PM »
0
Ryan:
No foul, no problem, just wanted to be clear about things. Any idea as to where Ebit is or where he is posting?

Kind regard,
Bill