Author Topic: SW1500/SW9 Decoder DN126M2  (Read 792 times)

0 Members and 1 Guest are viewing this topic.

johnh35

  • Crew
  • *
  • Posts: 244
  • Respect: 0
SW1500/SW9 Decoder DN126M2
« on: July 26, 2014, 03:28:32 PM »
0
I have seen this advertised, but is it actually out yet?

Rich_S

  • Crew
  • *
  • Posts: 1184
  • Gender: Male
  • Respect: +81
Rich S.

nickelplate759

  • Crew
  • *
  • Posts: 1329
  • Respect: +136
Re: SW1500/SW9 Decoder DN126M2
« Reply #2 on: July 26, 2014, 08:30:00 PM »
0
anyone know if it fits the rev.1 LifeLike SW9?
George

NKPH&TS #3628

I'm sorry Dave, I'm afraid I can't do that.

johnh35

  • Crew
  • *
  • Posts: 244
  • Respect: 0
Re: SW1500/SW9 Decoder DN126M2
« Reply #3 on: July 26, 2014, 09:51:29 PM »
0
anyone know if it fits the rev.1 LifeLike SW9?

Based on what has been said here, it should though you will have to run wires from the decoder to the motor. Just switch the brass motor contacts top to bottom to get the lower motor tab above the frame to wire to. Be sure to isolate  it from the frame with tape

sizemore

  • The Pitt
  • Crew
  • *
  • Posts: 2613
  • Respect: +31
Re: SW1500/SW9 Decoder DN126M2
« Reply #4 on: July 27, 2014, 01:17:04 PM »
0
I have to pull apart my an SW in the fleet, but it just occurred to me that this might work in Atlas GP-9's for those low-nose applications, replacing the lightboard under the long hood. And use an SM/LED with magnet wires for the nose headlight. Must head to the lab now....

The S.