« previous next »
Pages: [1]   Go Down

Author Topic: Z 905's on IM FT's  (Read 1012 times)

0 Members and 1 Guest are viewing this topic.

Joetrain59

  • Crew
  • *
  • Posts: 1600
  • Gender: Male
  • Respect: +75
Z 905's on IM FT's
« on: February 18, 2014, 08:20:27 PM »
0
Have a set of NYC Intermountain FT's, with drawbar between A/B units. Just replaced rear coupler on B unit with MT Z 905. Perfect fit, at the right height. Used the screw that was in place already. Have to see if the IM F unit's will work out as well.
 Just thought some would like to know.
 Joe D
Logged

Mike Madonna

  • Crew
  • *
  • Posts: 442
  • Respect: +84
Re: Z 905's on IM FT's
« Reply #1 on: February 18, 2014, 10:27:50 PM »
0
Joe,

Good to know.

I used "body mount" Unimates between my IM F-7s. I also tried a MTL 905 on the A unit pilot and the metal trip pin was contacting the pilot. So, I kept the standard MTL N scale coupler there (for now).
Logged
Mike
SOUTHERN PACIFIC Coast Division 1953
Santa Margarita Sub

Joetrain59

  • Crew
  • *
  • Posts: 1600
  • Gender: Male
  • Respect: +75
Re: Z 905's on IM FT's
« Reply #2 on: February 18, 2014, 10:42:51 PM »
0
Yes, the trip pins can get in the way at front of units. I just put Z905 on front of Atlas C420, with batwing plow. Had to add a shim to lower, so also just moved it forward a bit. Some folks just take the whole pin out anyway! They will rub against more common separate lift levers now too.
 Joe D
Logged
Pages: [1]   Go Up
« previous next »