Author Topic: Milwaukee Roads 3200 Gallon Tank  (Read 584 times)

0 Members and 1 Guest are viewing this topic.


  • Crew
  • *
  • Posts: 79
  • Respect: +10
Milwaukee Roads 3200 Gallon Tank
« on: January 01, 2014, 01:35:40 PM »
Anyone make a 3200 gallon fuel tank for an EMD in Nscale cant seem to find any?  You Milwaukee modelers out there...did you cut down the Kato or use a 3000 off an Atlas motor?


  • Crew
  • *
  • Posts: 413
  • Gender: Male
  • Respect: +76
    • Modutrak
Re: Milwaukee Roads 3200 Gallon Tank
« Reply #1 on: January 01, 2014, 06:49:47 PM »
I cut mine down, tank should be 15 feet 10 inches long. when I did mine (several years ago) I did it in 3 pieces to try to keep the fuel fittings in correct proportions not the best angle, but you can get an idea. Got the Bicentenial unit for Christmas,  May try something slightly different for that. FWIW, the fuel tank for GP 30 is pretty close to the correct size, but would require adding fuel fittings.

Here's a better side shot

This is from an ex Uper loco that was (and may still be ) destined to become a super detailed Milw 156. easier to see where cuts made on the gray

front truck had to be replaced
« Last Edit: January 01, 2014, 07:50:50 PM by milw156 »