Author Topic: Loren Perry's ATSF 3800 2-10-2's  (Read 3449 times)

0 Members and 1 Guest are viewing this topic.

superturbine

  • Crew
  • *
  • Posts: 909
  • Gender: Male
  • Respect: +62
Loren Perry's ATSF 3800 2-10-2's
« on: September 05, 2013, 08:17:13 PM »
0
Here are the first pictures of Loren Perry's ATSF 3800 Class 2-10-2's built from Kato Mikado's.  I am posting these for him because I think you guys need to see this "fabulous" work.










« Last Edit: September 05, 2013, 08:20:57 PM by superturbine »

peteski

  • Crew
  • *
  • Posts: 35444
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6696
    • Coming (not so) soon...
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #1 on: September 05, 2013, 09:02:17 PM »
0
Sweet!  I can almost smell the odor of hot steam and the coal oil smoke!  :D
The weathering of those models and the surrounding scenery is also outstanding!
. . . 42 . . .

Norway2112

  • Crew
  • *
  • Posts: 141
  • Respect: +2
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #2 on: September 05, 2013, 09:14:48 PM »
0
Awesome work Loren!  They look even better than I imagined, and I had high expectations!  Is that LA Union Station in the background?  I'd love to see some photos of that!

Ed Kapuscinski

  • Global Moderator
  • Crew
  • *
  • Posts: 26177
  • Head Kino
  • Respect: +11721
    • Conrail 1285
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #3 on: September 05, 2013, 09:22:18 PM »
0
Siiiick.

RWCJr

  • Crew
  • *
  • Posts: 176
  • Respect: 0
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #4 on: September 05, 2013, 09:34:55 PM »
0
Beautiful work Loren!!! Really captures the "bulk" of the workhorse 3800-class. Great piping and detail work.
Robert

Mark.S+10

  • Crew
  • *
  • Posts: 54
  • Respect: 0
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #5 on: September 05, 2013, 10:14:02 PM »
0
They are perfect, thanks for the pictures.  What did you use for the water heater mounted between the front steps?  I've been looking for those and haven't found any that look right before I'd seen yours?  Nothing says AT&SF steam like that water heater mounted in that location.

Thanks, Mark

Mike Madonna

  • Crew
  • *
  • Posts: 488
  • Respect: +150
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #6 on: September 05, 2013, 10:22:49 PM »
0
"Fabulous".... you got that right!  ;)
Mike
SOUTHERN PACIFIC Coast Division 1953
Santa Margarita Sub

Loren Perry

  • Crew
  • *
  • Posts: 289
  • Respect: +116
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #7 on: September 05, 2013, 10:40:11 PM »
0
Thanks, guys! You are way too kind.

Jason (aka. Superturbine) posted the photos for me because I still can't figure out how to do it, so thank you, Jason!

I don't think I could have done this without Jason's help. He made the resin castings of the boiler/cab assembly and the tender. He also sent me a fully assembled and operational 2-10-2 chassis built from Kato 2-8-2 elements. After seeing how he did it, I built the second chassis like he did and went from there. Jason and I cooperated on some of the other parts of the job. I ended up designing and etching the new side rods from nickel silver - they're drop-in replacements for the Kato rods but with a position for the fifth axle.

The Elesco feedwater heaters on the pilot decks are scratchbuilt. I wanted to use the Detail Associates white metal casting but it has pronounced mold parting lines and other issues so I decided to "roll my own". I made them from brass tubing with solid plastic rod inside, and then added styrene supports and round access ports on their fronts.

Other scratchbuilt fittings include the air reservoirs, whistles, train number indicators, pilot deck ladders, bell support brackets, boiler backheads, and functional hinged stack cap extensions. You can see the stack extension in the raised position in the second photo showing Engine 3868 emerging from a tunnel. I normally keep them lowered because that's how they appear in nearly every prototype photo I've found except for one showing an engine exiting a tunnel on Tehachapi Loop.

Both engines pull like real beasts of burden - I estimate each one is good for 60 or so cars. My layout is set up for 25 car trains but I'll assemble a test train soon and see what they can do. They run just as smoothly and reliably as stock Kato Mikados.

I've completed a detailed article for Ntrak's Steam Locomotive Handbook's next Addendum, so expect to see more about these later.

Loren Perry

  • Crew
  • *
  • Posts: 289
  • Respect: +116
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #8 on: September 05, 2013, 10:48:26 PM »
0
Awesome work Loren!  They look even better than I imagined, and I had high expectations!  Is that LA Union Station in the background?  I'd love to see some photos of that!


Yes, you're right! I did an detailed article on how I built L. A. Union Station in N-Scale magazine a few years back, and they're are lots of photos there. It's also appeared in several of my other articles in the same magazine since then.

Norway2112

  • Crew
  • *
  • Posts: 141
  • Respect: +2
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #9 on: September 05, 2013, 10:53:18 PM »
0

 I did an detailed article on how I built L. A. Union Station in N-Scale magazine a few years back, and they're are lots of photos there.

Which issue was this, I'll try to dig one up on ebay or somewhere.  As an SP modeler, I'd be interested in your article for sure.

mmagliaro

  • Crew
  • *
  • Posts: 6505
  • Gender: Male
  • Respect: +2014
    • Maxcow Online
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #10 on: September 05, 2013, 11:09:31 PM »
0
Loren,

I congratulate you on two exceptionally beautiful engines.  The fit and parts are all crisp, the paint and weathering are wonderful.
You did a fantastic job!
And I would be remiss without congratulating Jason as well.  He provided some terrific shell and frame parts to make this possible.


Jason did the tender shell casting, but where did the tender frame and trucks come from?

Loren Perry

  • Crew
  • *
  • Posts: 289
  • Respect: +116
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #11 on: September 05, 2013, 11:43:19 PM »
0
Loren,

I congratulate you on two exceptionally beautiful engines.  The fit and parts are all crisp, the paint and weathering are wonderful.
You did a fantastic job!
And I would be remiss without congratulating Jason as well.  He provided some terrific shell and frame parts to make this possible.


Jason did the tender shell casting, but where did the tender frame and trucks come from?

The trucks are from Bachmann's Vanderbilt tender and the tender frame is scratchbuilt from .060" black Evergreen styrene.

superchief

  • Crew
  • *
  • Posts: 347
  • Respect: +33
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #12 on: September 06, 2013, 01:13:14 AM »
0
W :oW, is to say the least Loren those engines are AWESOME!!!!!!!! the detail is great.......... BUT............ I read "FUNCTIONAL hinged stack cap extensions!!!!!!!!!!!! I noticed in the pictures that one was up and one was down BUT THEY WORK!!!!!!!!! you are THE MAN!!!!!!!!!!!! can you go into greater detail on how you did those, I have tried the extensions before by gluing a tube to the top of the stack and some wire but they NEVER look right, just like trying to the heavy "tarp" curtain and the rear of the cab, Jason uses toilet paper with glue and it looks pretty good but it is hard to get it right, The painting and weathering as noted before is OUTSTANDING!!!!!!  GREAT JOB, Gordon :D

strummer

  • Crew
  • *
  • Posts: 998
  • Respect: +65
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #13 on: September 06, 2013, 02:30:17 AM »
0
Wow...

I particularly like the third photo; the roadbed and the vegetation, to say nothing of the engine...hard to believe it's N scale...

Mark in Oregon

Cajonpassfan

  • Crew
  • *
  • Posts: 5410
  • Respect: +1982
Re: Loren Perry's ATSF 3800 2-10-2's
« Reply #14 on: September 06, 2013, 02:42:56 AM »
0
Loren, what everybody else said! Wow, truly stunning! Santa Fe engines NEED all that piping and you nailed it!
I'd be interested in how you built the drifting valves....is that a casting or are they individually scratched?
Again, a great job! I have several of Jason's beautiful boiler castings, so you're giving me an inspiration....
Best, Otto K.