Author Topic: Ditch Lights with Digitrax DN163K1C  (Read 1021 times)

0 Members and 1 Guest are viewing this topic.


  • Posts: 5
  • Respect: 0
Ditch Lights with Digitrax DN163K1C
« on: June 22, 2010, 04:44:39 AM »
Hi All,  

I have  converted several   Kato   N scale locos with the Digitrax Dn163K1C   decoder  using the  extra  pads for the ditch   lights with  warm  yellow  SMD's  ...   the lights work  on  F1 /F2  i  set the CV51  &  CV52   with a value of  4 to each  the  lights do flash  but i   have to  turn on  F1 then after a couple of flashes F2  to   give the right effect.    

I  would like it  to   work   as the video  below  from  one  button  ... if its not too  complicated  it  would be good to have the ditch  lights turn off after so  long as well   ............. but getting the lights to   turn   on together giving the  ditch light effect is  my #1 concern.  

Help  Please   ??? ???

Many thanks.  
« Last Edit: June 23, 2010, 04:42:28 AM by upnick »