Micro Trains passenger wheels

[trainforfun]

Agreed, sounds as if the trucks were mounted backwards.

Yes these trucks have an offset bolster but you can't install them backward , they just would not fit between the stairs and underside details

[thomasjmdavis]

A few photos might help resolve the problem.

(note, edited to revise odd Midwestern grammar)

[Bill H]

Will try the truck alone to see .
The wheels I bought are 36" x 0.540" by ESM # 920200
I am waiting for the FVM , will see

They were not rolling bad but I wanted metal wheels for maybe future lights and also to add weight to the bottom of the car , all these cars have body mounted couplers .
I checked the gauge they are ok .
I have to inspect if they rub to the underside of the car but they are supposed to be the same size .

I have close to 20 MTL heavyweights using ESM 36" wheels. Zero problems of any kind. Really do not think it is the ESM wheels.

[trainforfun]

I have close to 20 MTL heavyweights using ESM 36" wheels. Zero problems of any kind. Really do not think it is the ESM wheels.

Ok thanks
As I said a truck by itself is running very well , free rolling , I will investigate more to see if it's touching somewhere under the car

[trainforfun]

Will try the truck alone to see .
The wheels I bought are 36" x 0.540" by ESM # 920200
I am waiting for the FVM , will see

They were not rolling bad but I wanted metal wheels for maybe future lights and also to add weight to the bottom of the car , all these cars have body mounted couplers .
I checked the gauge they are ok .
I have to inspect if they rub to the underside of the car but they are supposed to be the same size .

Received and installed the FVM ( Scale Trains ) ones , no problem at all , the shaft loooks a little bit shorter , they roll better , no derailment anywhere .
The ones I have are FVM 3610 with 0.540" axle

Very happy with them