« previous next »
Pages: [1]   Go Down

Author Topic: Intermountain FT LED issue  (Read 1170 times)

0 Members and 1 Guest are viewing this topic.

Joetrain59

  • Crew
  • *
  • Posts: 1600
  • Gender: Male
  • Respect: +75
Intermountain FT LED issue
« on: February 21, 2014, 06:06:13 PM »
0
The LED goes off intermittently! different spots on track. Cleaned the track, still happens. Are the 3 mm LED's
 Any Idea what could be causing this. Oh, it is only in direction of travel, so doesn't seems to be a BEMF issue.
 Thanks,
 Joe D
Logged

davefoxx

  • Crew
  • *
  • Posts: 12331
  • Gender: Male
  • TRW Plaid Member
  • Respect: +8545
Re: Intermountain FT LED issue
« Reply #1 on: February 21, 2014, 06:20:43 PM »
0
Try cleaning the wheels.  If that doesn't work, check the connection of the wires to the headlight and the PC board.  If that doesn't work, perhaps our DCC experts can chime in with more suggestions.

DFF
Logged

A Proud HOer
BUY ALL THE TRAINS!
Still General Counsel to the Laurel Valley Ry.

Joetrain59

  • Crew
  • *
  • Posts: 1600
  • Gender: Male
  • Respect: +75
Re: Intermountain FT LED issue
« Reply #2 on: February 21, 2014, 06:26:38 PM »
0
Just did that after cleaning track. I never had to open up an IM F unit before. Difficult to re-assemble? I want to check the wires to LED, but frame must be separated.
 Thanks,
 Joe D
Logged

garethashenden

  • Crew
  • *
  • Posts: 2321
  • Respect: +1815
Re: Intermountain FT LED issue
« Reply #3 on: February 21, 2014, 06:44:14 PM »
0
You need to remove the front coupling, then the shell should lift off. It may need to be pulled apart slightly, but it's not too hard.
Logged

Joetrain59

  • Crew
  • *
  • Posts: 1600
  • Gender: Male
  • Respect: +75
Re: Intermountain FT LED issue
« Reply #4 on: February 21, 2014, 11:15:16 PM »
0
Was a weak/badly soldered wire to back of a LED. OK-Dokey now. Love how easily the shell lifted off.
 Thanks,
 Joe D
Logged
Pages: [1]   Go Up
« previous next »