Years ago, when I was building a couple of NTRAK modules depicting Devil's Slide/Croyden and Wilhelmina Pass, I wanted to get my sky color correct.
So, I decided to visit my local WalMart and choose a few color chips, take them outside (at noon on a clear day in the early Summer in Northern Utah) and see if I could match a blue color to the color of the sky about halfway up from the horizon to directly overhead. Although this sounded pretty simple, I found that the colors I had chosen were pretty far off from the actual sky color, so...I made three more trips inside, comparing the colors I found to the actual sky, until I finally found one that was pretty close to what the sky looked like at about the same angle of viewing as my skyboard would be on my new modules.
The color I found was called "Bird's Eye" and here's a photo of the mixing information on the paint bucket lid that sits under my layout until I need to paint more skyboards on my layout...
Photo (1) - Paint mix information for a paint color that's pretty close to actual sky blue in my neck of the woods: 
Although, being a professional artist and photographer, I know that "sky blue" varies from location to location, season to season, and depends on the time of day and the atmospheric conditions (dust, smoke, altitude). I was building my modules to represent early Summer, in Northern Utah through Weber/Echo Canyons...which was only about 20 minutes away from my local WalMart store.
I also know that clear "sky" color varies in intensity from the horizon, being lighter, then progressively darker until it reaches its darkest shade directly overhead...so, I was gonna have to "shade" my blue skyboards by airbrushing them with Titanium White (very dilute) at my skyboard's lowest point making a fairly even "fade" to the darker blue of the paint I had just purchased. Since the top of my skyboard at home is about eye-level for me at 6' tall, that blue should be about the same shade and intensity as what I would see looking out west towards the Great Salt Lake if I was modeling perfectly flat topography.
BUT, I'm not modeling perfectly flat topography...in fact, I'm modeling a mainline that runs in two very steep canyons, so the shade of blue I should see would be fairly close to the shade of the paint I had chosen, with some high, whispy clouds thrown in with my airbrush, with a few distinct clouds maybe low above the cliff tops of the canyons.
So, I never have gotten around to airbrushing any fading up on my skyboards, but, I did paint up a 4X8 piece of 1/8" tempered Masonite to use as a temporary backdrop for my module photography with some distinctive clouds to play around with, and it worked great for my photography contest entries and documenting my modules...and allowed me to light the "sky" separately from my module scenery to achieve effects such as low "golden hour" late afternoon light, or high noon light...or whatever in-between.
Photo (1) - Wilhelmina Pass at the 1000 Mile Tree Monument on UP's mainline between Weber & Echo Canyons:
Photo (2) - Here's a prototype photo of the same area from a different viewpoint:
Although not a perfect match, I didn't take the prototype photo, so I don't know what brand of film was used, nor what kind (if any) image manipulation was done, what the season was, or what time of day etc.
Photo (3) - Just for the sky color, here's a fairly recent photo I took of Echo Canyon around 5:00PM in early Summer this year:
This last one is almost a match, with no image manipulation, just straight out of my phone.
Just for the helluvit, here's a photo that a friend of mine took at the local Hostler's Train Festival a few years back that shows my present skyboard with my unfinished Echo scenery and no clouds...just bare paint and just the 5000K lights from my layout lights.
Photo (4) - Blue Sky over Echo scenery on my present layout with no clouds or fading:
Interestingly, after our club disbanded, a new club was formed from some of the original members, and they kept the fascia and skyboard colors. Other N-scale clubs in the area have also decided to use the skyboard color...depicting a variety of seasons and locations. People seem happy with it, so...I thought I'd pass it along as a base "sky" color that can be easily modified with fading or clouds applied with an airbrush, or, if you're an artist, your paintbrushes.
And, if this color doesn't suit you, I'd suggest doing what I did and go to your local paint store, WalMart, Home Depot, Lowe's...on a nice, clear day between noon and 2:00PM and pick out some colors samples you think look like "sky"...take 'em outside and compare them to the actual sky...do it until you find what you consider to be the closest color and buy a gallon. I bought mine in 2011 and I've still got three quarters of it for my future layout additions.
Cheerio!
Bob Gilmore
EDITED - for typos, grammar and clarity