Author Topic: Rule 17 on Digitrax DN147K1c  (Read 313 times)

0 Members and 1 Guest are viewing this topic.

trainforfun

  • Crew
  • *
  • Posts: 1911
  • Respect: +105
Rule 17 on Digitrax DN147K1c
« on: October 30, 2026, 10:43:32 AM »
0
Hi
This decoder is FX3 , I would like to be able to light the front and rear headlight independantly of the direction and also to dim the lights , I would like to use a loco as a DPU on the rear of a train .
I did a lot of adjustments on my many locos , speed matched , acceleration and deceleration etc etc  but I can't figure what to do to achieve want I want , and I know it's possible to do it .

It's explained in the DIGITRAX instructions , but I can't understand clearly which value I should put to each CV .....

Thanks in advance !
 
Thanks ,
Louis



peteski

  • Crew
  • *
  • Posts: 35434
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6696
    • Coming (not so) soon...
Re: Rule 17 on Digitrax DN147K1c
« Reply #1 on: October 30, 2026, 01:27:09 PM »
+1

LOL! Welcome to the wonderful world of Digitrax (techincal) user manuals. Not that some other brands are much better, but IMO Digitrax is right at the bottom.

Os for the Digitrax lights customization, I have messed around quite some time ago, and I also remember it being a puzzler, And I'm a "computer guy". But I don't recall any specifics - sorry. I'm now an ESU fan.
« Last Edit: October 30, 2026, 01:28:43 PM by peteski »
. . . 42 . . .

trainforfun

  • Crew
  • *
  • Posts: 1911
  • Respect: +105
Re: Rule 17 on Digitrax DN147K1c
« Reply #2 on: October 30, 2026, 02:58:05 PM »
0
LOL! Welcome to the wonderful world of Digitrax (techincal) user manuals. Not that some other brands are much better, but IMO Digitrax is right at the bottom.

Os for the Digitrax lights customization, I have messed around quite some time ago, and I also remember it being a puzzler, And I'm a "computer guy". But I don't recall any specifics - sorry. I'm now an ESU fan.

Thanks my friend !!!
I think we should take a "lesson of Digitrax language" at the university , it's only 6 years ....
I was happy to see you had answer my question but then i was a bit disapointed .... ha ha ha

With ESU do they say which CV to modify , maybe just a BIG maybe it would be the same ????
« Last Edit: October 30, 2026, 03:00:20 PM by trainforfun »
Thanks ,
Louis



John

  • Administrator
  • Crew
  • *****
  • Posts: 14021
  • Respect: +4192
Re: Rule 17 on Digitrax DN147K1c
« Reply #3 on: October 30, 2026, 04:19:38 PM »
0
This is AI, but seems accurate

To perform Rule 17 functions on a Digitrax DN147K1c decoder, you should set CV49 to 104 to implement the dimming of the headlight when required. Additionally, ensure that CV29 is set to 06 for proper configuration.
digitrax.com
CV Settings for Rule 17 Functions on Digitrax DN147K1c

To implement Rule 17 functions on a Digitrax DN147K1c decoder, you need to configure specific CVs. Below are the required settings:
Required CVs and Values
CV Number   Function   Value
CV49   Headlight Dimming   104
CV29   Decoder Configuration   06
Explanation of Settings

    CV49: Setting this to 104 enables the dimming of the headlight according to Rule 17, which typically requires the headlight to dim when the locomotive is stationary or in specific operational scenarios.

    CV29: This should be set to 06 to ensure the decoder is properly configured for advanced speed steps and other operational modes.

Make sure to program these values into your decoder to achieve the desired functionality.
digitrax.com

Maletrain

  • Crew
  • *
  • Posts: 4259
  • Respect: +925
Re: Rule 17 on Digitrax DN147K1c
« Reply #4 on: October 30, 2026, 04:42:57 PM »
0
The CV29 value of 6 seems like an odd thing to include in these directions.

All 6 does is set the speed steps to 28/128 instead of 14, and allows analog operation 

I don't see where either of those settings enable Rule 17 operation.

And I don't see why turning off analog operation or even using 14 speed steps would prohibit Rule 17 operation.

It just seems like a compete non-sequitur.

And, it taken to prohibit any other CV29 value, it pre-empts 4 digit addresses, using speed tables, running a unit in reverse when set to forward, (and some other stuff like Railcom).

Will setting CV29 to my usual values of 34 or 50 really over-ride setting CV 49 to a value of 104?

peteski

  • Crew
  • *
  • Posts: 35434
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6696
    • Coming (not so) soon...
Re: Rule 17 on Digitrax DN147K1c
« Reply #5 on: October 30, 2026, 04:55:05 PM »
0
Thanks my friend !!!
I think we should take a "lesson of Digitrax language" at the university , it's only 6 years ....
I was happy to see you had answer my question but then i was a bit disapointed .... ha ha ha

With ESU do they say which CV to modify , maybe just a BIG maybe it would be the same ????

Unfortunately ESU handles their function outputs and function mappings CVs totally differently from ESU. Then the LokProgrammer GUI makes modifying these settings very easy and somewhat intuitive.
. . . 42 . . .

jagged ben

  • Crew
  • *
  • Posts: 3381
  • Respect: +594
Re: Rule 17 on Digitrax DN147K1c
« Reply #6 on: October 31, 2026, 01:10:29 AM »
0
Hi
This decoder is FX3 , I would like to be able to light the front and rear headlight independantly of the direction and also to dim the lights , I would like to use a loco as a DPU on the rear of a train .

This is not fully possible with Digitrax FX3 decoders.  Trust me I've tried. The closest you can get is dimming on the front light but not the rear. The settings that you'd think ought to be correct result in the rear light simply turning off when you try to dim.  IIRC the issue does not respond to changing the NDOT, so more precisely you cannot get dimming on the 'yellow' function output, although possibly I'm remembering that backwards.   The manual will not explain all this but it's true.  I think if you read some of the wording real carefully and apply the law of the exluded middle it implies that dimming only works for the forward light.

peteski

  • Crew
  • *
  • Posts: 35434
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6696
    • Coming (not so) soon...
Re: Rule 17 on Digitrax DN147K1c
« Reply #7 on: October 31, 2026, 01:27:15 AM »
0
Here is an excerpt from the ESU manual:
Rule 17 Forward: Applicable only if the headlight output is set to either “Dimmable headlight” or “Dimmable headlight with fade in/out”. Causes the effect to be dimmed to around 60% of the set brightness, if the locomotive is stopped. When the engine is running forward, the output will be increased to a 100%.

Rule 17 Reverse: Like Rule 17 Forward, but the brightness will be increased to a 100% when the locomotive drives backwards.

Unfortunately ESU does not have non-sound (LokPilot) version of a decoder with that board shape. You would need either a LokSound or hardwire any small LokPilot decoder.
https://www.esu.eu/en/products/former-products/lokpilot-nano-standard/
. . . 42 . . .

trainforfun

  • Crew
  • *
  • Posts: 1911
  • Respect: +105
Re: Rule 17 on Digitrax DN147K1c
« Reply #8 on: October 31, 2026, 03:03:47 PM »
0
Thanks you all for your answers I will try what you said if it's better than the answer I got after I posted a question on the Digitrax site and this is what I got :

1) For the Rule 17 setup. program CV49=104 and CV50=120.
Headlights will dim in the direction opposite that of travel and can be forced dim with F4.

2) For front and rear headlights independently controlled and regardless of direction, try programming as follows:
CV33=1
CV34=1
CV35=4
CV36=8
CV37=2
Front headlight will then be operated by F0 and rear headlight will be operated by F3.

1 ) I first installad the dimming fonction and it works front and rear  !!!
The lights were still following the direction of the locomotives .

2)  I then installed the non directional F and R headlights , it works but not with the dimming thing

It's one or the other , I don't really care about the dimming and I prefer to get the lights on when I want and not with the direction of the locomotive , all this was because I wanted a DPU on the rear with the locomotive light on a bit like a "FRED"


Thanks ,
Louis



kiwi_bnsf

  • Crew
  • *
  • Posts: 294
  • Respect: +391
Re: Rule 17 on Digitrax DN147K1c
« Reply #9 on: October 31, 2026, 03:54:02 PM »
0
Unfortunately ESU does not have non-sound (LokPilot) version of a decoder with that board shape. You would need either a LokSound or hardwire any small LokPilot decoder.
https://www.esu.eu/en/products/former-products/lokpilot-nano-standard/

ESU absolutely does offer both LokPilot and LokSound decoders for the Kato K1 form factor:

ESU LokPilot 59741
https://www.esu.eu/en/products/lokpilot/lokpilot-5-micro-dcc-kato-usa/

ESU LokSound 58741
https://www.esu.eu/en/products/loksound/loksound-5-micro-dcc-kato-usa/

These are my favourite N scale decoders!


Some famous guy on this forum once promised a write-up of the LokPilot 59741…
https://www.therailwire.net/forum/index.php?topic=60189.msg829307#msg829307

 :D
--
Tim Benson

Modelling Tehachapi East Slope in N scale circa 1999

peteski

  • Crew
  • *
  • Posts: 35434
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6696
    • Coming (not so) soon...
Re: Rule 17 on Digitrax DN147K1c
« Reply #10 on: November 01, 2026, 10:25:47 AM »
0
LOL Tim, that write-up is coming - other, more pressing projects, keep coming up. Sorry!  It is about 90% ready.  But with the leaf raking and home winterizing season here, it will still be a while . . .

And I stand corrected as far as the ESU decoder goes.  When I Googled DN147K1c, I was shown a different decoder.  That will teach me to  trust computer search results without verifying them.  I guess the would not have happened if I knew what model the decoder was installed in.  So yes, ESU "silent"decoder is available and for similar  price to the Digitrax version.

I tried to recreate the mistaken identification and it appears that I somehow ended up looking at DN147A0 decoder for Atlas models. Yhat one has no equivalent LokPilot version :facepalm:

In the end it looks like trainforfun is happy with just having separate control of each end's headlights without Rule 17. Digitrax decoder does handle that configuration.


« Last Edit: November 01, 2026, 10:28:23 AM by peteski »
. . . 42 . . .