« previous next »
Pages: [1]   Go Down

Author Topic: Length of Wheels of Time horse car roof needed  (Read 1029 times)

0 Members and 1 Guest are viewing this topic.

Iain

  • Crew
  • *
  • Posts: 4895
  • Gender: Female
  • Na sgrìobhaidh a Iain
  • Respect: +840
    • The Best Puppers
Length of Wheels of Time horse car roof needed
« on: April 25, 2020, 10:30:52 AM »
0
While I already have a WoT horse car roof, I had cut it down previously.  However, for an upcoming project, I will match the length of the roof as manufactured.  To that end, could someone mic out the overall length?  I don't need any other measurements as I can take those off the one I have.  Preferred to the nearest thousandth.
Logged
I like ducks


Tom Todd

  • Crew
  • *
  • Posts: 150
  • Gender: Male
  • Respect: +27
Re: Length of Wheels of Time horse car roof needed
« Reply #1 on: April 26, 2020, 12:46:38 PM »
0
I just went out to my train building. My 6 inch caliper is too short to correctly measure the roof. 😐
Logged
Go Great; Go Great Northern

Or SP&S

Skeebo

  • Crew
  • *
  • Posts: 102
  • Respect: +163
Re: Length of Wheels of Time horse car roof needed
« Reply #2 on: April 28, 2020, 10:56:25 AM »
0
No one else responded so I'll give it a shot. I measured my SP Number 7230 at; 81 ft 9 N scale inches, with two rules, a third was 82 ft 3 inches, 142 mm, and full scale at 6 and 11/64th inches, or 6.017. Hope that helps,

Logged

Tom Todd

  • Crew
  • *
  • Posts: 150
  • Gender: Male
  • Respect: +27
Re: Length of Wheels of Time horse car roof needed
« Reply #3 on: April 28, 2020, 11:48:31 AM »
0
Six and 11/64ths equals 6.172.
Logged
Go Great; Go Great Northern

Or SP&S
Pages: [1]   Go Up
« previous next »