« previous next »
Pages: [1]   Go Down

Author Topic: Briggs Models SDL39  (Read 2835 times)

0 Members and 1 Guest are viewing this topic.

briggsmodels

  • Crew
  • *
  • Posts: 64
  • Respect: +31
Briggs Models SDL39
« on: September 13, 2018, 03:55:48 PM »
+5
Hello Railwire,

Hello Railwire. I have finished the development on my SDL39 kit. This model comes with 3d printed parts for body, fuel tank, and details, as well as etched parts for handrails and finer parts. Wire, a large weight, window glass template and material, and an instruction article with step by step photos will be available for download. The model is available in my website store and will start shipping next week.





Thank you for looking. I am available to answer any questions anyone might have.

Jeff Briggs, Owner
Briggs Manufacturing Associates
www.briggsmodels.ca
« Last Edit: September 29, 2018, 02:50:57 PM by GaryHinshaw »
Logged

Mark5

  • Crew
  • *
  • Posts: 11850
  • Always with the negative waves Moriarty ...
  • Respect: +932
Re: Briggs Models SDL39
« Reply #1 on: September 13, 2018, 10:30:21 PM »
0
Please tell us about the chassis. :D

Mark
Logged

briggsmodels

  • Crew
  • *
  • Posts: 64
  • Respect: +31
Re: Briggs Models SDL39
« Reply #2 on: September 13, 2018, 10:56:16 PM »
+1
The chassis is 3d printed, which the Atlas C628/C630 mechanism parts, including trucks, clip into. The Atlas trucks are only about .02" off the SDL39 truck wheelbase, and I fudfed the side frames a bit to fit, after clipping the original ones off. Universal couplings are included, and there is a large weight that fits on top, it brings the weight up nicely. The model runs like an Atlas C630. I hope that helps.
Logged

peteski

  • Crew
  • *
  • Posts: 35242
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +6631
    • Coming (not so) soon...
Re: Briggs Models SDL39
« Reply #3 on: September 13, 2018, 10:56:45 PM »
0
Quote from: Mark5 on September 13, 2018, 10:30:21 PM
Please tell us about the chassis. :D

Mark

That chassis (weight)  looks like tungsten! Wouldn't it be cool if it really was?  :D
Logged
. . . 42 . . .

briggsmodels

  • Crew
  • *
  • Posts: 64
  • Respect: +31
Re: Briggs Models SDL39
« Reply #4 on: September 29, 2018, 02:40:45 PM »
+2
A photo of the finished pilot model. These kits are now available and shipping. www.briggsmodels.ca
Logged

Doug W

  • Crew
  • *
  • Posts: 82
  • Respect: +40
Re: Briggs Models SDL39
« Reply #5 on: September 29, 2018, 05:08:46 PM »
0
I don't need one, but this looks great!

Logged

daniel_leavitt2000

  • Crew
  • *
  • Posts: 6443
  • Respect: +1427
Re: Briggs Models SDL39
« Reply #6 on: September 30, 2018, 09:54:22 AM »
0
I love those bandits!
Logged
American eyes, American eyes
View the world from American eyes
Bury the past, rob us blind
And leave nothing behind

skytop35

  • Crew
  • *
  • Posts: 807
  • Respect: +893
Re: Briggs Models SDL39
« Reply #7 on: September 30, 2018, 02:05:02 PM »
0
Two on the way for me. Looking forward to building them !
Logged
Bill Denton

Tom L

  • Crew
  • *
  • Posts: 475
  • Respect: +530
Re: Briggs Models SDL39
« Reply #8 on: September 30, 2018, 03:00:28 PM »
0
Out of my era but a must have.  Saving my pennies for at least one.

 Mr. Denton, I am looking forward to seeing your results.

Tom L
Wellington CO
Logged

BCR 570

  • Crew
  • *
  • Posts: 2467
  • Gender: Male
  • Respect: +4998
    • BCR Dawson Creek Subdivision in N Scale
Re: Briggs Models SDL39
« Reply #9 on: October 08, 2018, 08:04:36 PM »
0
I had an opportunity to see and hold the finished model yesterday.  It is the first finished locomotive I have seen assembled from a 3D printed kit and the results were amazing.  I was also impressed with the flexible wire arrangement for the pick-ups from the trucks, which still rotated quite freely.  I am looking forward to seeing one completed in full Milwaukee Road livery from one of our RW members!

Tim
Logged
T. Horton
North Vancouver, B.C.
BCR Dawson Creek Subdivision in N Scale
www.bcrdawsonsub.ca
https://www.youtube.com/channel/UC3MbxkZkx7zApSYCHqu2IYQ

central.vermont

  • Crew
  • *
  • Posts: 2627
  • Gender: Male
  • Jon
  • Respect: +148
Re: Briggs Models SDL39
« Reply #10 on: October 08, 2018, 09:03:27 PM »
0
Just came across this shot that was recently uploaded to the "Fallen Flags Site".
http://www.rr-fallenflags.org/milw/mlw0590o05.jpg

Jon
Logged

Jim Starbuck

  • Crew
  • *
  • Posts: 1061
  • Respect: +3133
Re: Briggs Models SDL39
« Reply #11 on: October 08, 2018, 10:40:54 PM »
0
I’ve got one on the way as well.
Looking forward to it.

Jim
Logged
Modutrak Iowa Division
Modutrak.com
Better modeling through peer pressure

milw12

  • Crew
  • *
  • Posts: 375
  • Respect: +335
Re: Briggs Models SDL39
« Reply #12 on: October 09, 2018, 05:21:52 PM »
0
Can't pass this up as a Milwaukee modeler, looking forward to it!

-Lucas
Logged
Pages: [1]   Go Up
« previous next »