Need Advice: Shipping Containers from Different Manufacturers

[mu26aeh]

@crappie — The http://www.digcomdesigns.net/ website is only producing a blank page this morning. I hadn't thought of making containers out of heavy paper. I use a lot of 110# paper so it's already laying around. (For comparison, normal printer paper is 20#.)

The website appears to be up now.  You can also go to www.strikeforcehobbies.com and click on DigCom Designs PaperCraft Products, about 1/3 way down page on left, or check them out on Facebook if you are on there, as that is where they usually announce new models.  I've ordered thru their FB page and the strikeforce page with no issues.  I use photo paper (8.5 mil thickness) for the printouts as I feel it gives a better finish to the model.  Here are a couple 53' trailers I have made.

20160306_154711 by Adam Henry, on Flickr

20160306_154719 by Adam Henry, on Flickr

[crappie]

  just type DigCom Designs in search engine I use Goggle

[Caveman]

I summarized the information from this thread and put it on my blog here. If anyone has any corrections or wants to be identified by anything other than the user name you used here, let me know and I'll fix it.

Thanks everyone!

[MetroRedLine]

I summarized the information from this thread and put it on my blog here. If anyone has any corrections or wants to be identified by anything other than the user name you used here, let me know and I'll fix it.

Thanks everyone!

Thanks! I even posted a reply to your blog post regarding where to find foam sheets in Southern California and put the link to the place where I bought my 1" & 2" thick sheets.