« previous next »
Pages: 1 [2]   Go Down

Author Topic: Atlas GP9's and Digitrax  (Read 4710 times)

0 Members and 1 Guest are viewing this topic.

wm3798

  • Crew
  • *
  • Posts: 16551
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +7432
    • Western Maryland Railway Western Lines
Re: Atlas GP9's and Digitrax
« Reply #15 on: March 21, 2008, 12:42:04 PM »
0
If your Geeps are older than the latest release, you can't use the drop in decoder... 
Lee
Logged
Rockin' It Old School

Lee Weldon www.wmrywesternlines.net

shark_jj

  • Guest
Re: Atlas GP9's and Digitrax
« Reply #16 on: March 21, 2008, 01:38:41 PM »
0
Lee, they are the latest release.
Logged

Rich Businger

  • Crew
  • *
  • Posts: 36
  • Respect: 0
Re: Atlas GP9's and Digitrax
« Reply #17 on: March 21, 2008, 03:15:50 PM »
0
I'll still check later today.  The DN163A2 has slots which will allow you to slide the motor contact through the decoder.  I always solder mine to ensure a good connection.


rich
Logged

Rich Businger

  • Crew
  • *
  • Posts: 36
  • Respect: 0
Re: Atlas GP9's and Digitrax
« Reply #18 on: March 21, 2008, 10:35:02 PM »
0
Sorry for the delay,  I took one of my GP9s apart just to be 100% sure.  It takes the DN163A2.


Rich
Logged

Walkercolt

  • Guest
Re: Atlas GP9's and Digitrax
« Reply #19 on: March 22, 2008, 12:51:00 AM »
0
The guy in our club who's the DCC guru says sometimes decoders "get stupid" like our computers. Well, you can't just unplug the decoders for ten minutes and the thing get it's mind back, sometimes you need to remove the decoder and using a jumper wire short the two contact points together, erasing the memory, re-install it and re-program it and it will magically work, when all else fails. I've had a TV and a DVD player and a video camera all get stupid. Remove the power, wait a few minutes, power them back up and they work. During WWII, they called them "Gremlins". ???
Logged

Greyryder

  • Guest
Re: Atlas GP9's and Digitrax
« Reply #20 on: March 22, 2008, 04:24:06 AM »
0
That's why you shouldn't feed your Mogwai, after midnight. ;)
Logged

Walkercolt

  • Guest
Re: Atlas GP9's and Digitrax
« Reply #21 on: March 22, 2008, 10:05:18 PM »
0
I'm positive that some "inatimate objects" have a life of their own. Look at Allen wrenches...they grow legs and walk-off. So do pens. And screwdrivers, and drill bits and taps. Electronics have minds that don't work when we want them to. And major appliances fix themsevles when you call the repairman out. 'Til he leaves, of course. "Stuff" is out to get us! :-[ ::)
Logged

Chulvis

  • The Pitt
  • Crew
  • *
  • Posts: 3437
  • Gender: Male
  • Respect: +10
Re: Atlas GP9's and Digitrax
« Reply #22 on: March 22, 2008, 11:00:00 PM »
0
The DN163A2 is the way to go for Atlas Geep7 and 9's. I installed them in my new run Western Pacific GP7's and they work just fine. No problems so far.
Logged

Rich Businger

  • Crew
  • *
  • Posts: 36
  • Respect: 0
Re: Atlas GP9's and Digitrax
« Reply #23 on: March 22, 2008, 11:40:51 PM »
0
The Digitrax DN163A2 fits the following Decoder Ready locomotives from Atlas:

GP7, GP9, GP30, GP35, SD9, and will fit the GP15 when released.


Rich
Logged
Pages: 1 [2]   Go Up
« previous next »