Author Topic: Kato Business Car - Replacement Coupler  (Read 404 times)

0 Members and 1 Guest are viewing this topic.

Shaggy170

  • Crew
  • *
  • Posts: 57
  • Gender: Male
  • Respect: +13
Kato Business Car - Replacement Coupler
« on: November 09, 2026, 05:16:24 PM »
0
So, random thought here since I started noticing I have a lot of the Kato business cars now of the same road name/family tree. Is there a replacement coupler or a way to get the coupler on the platform end to function? At least in my experience, the coupler that is there works but the second the car is not on a tangent, everything comes undone. I basically want to couple other cars to it to replicate what happens on many OCS trains out there where a platform observation may not be the last car in the train.

Google is no help.

Thanks,
Nicholas

nkalanaga

  • Crew
  • *
  • Posts: 10611
  • Respect: +1776
Re: Kato Business Car - Replacement Coupler
« Reply #1 on: November 10, 2026, 01:23:32 AM »
0
Interesting.  Just to see what happened, I took mine, coupled two other Kato cars behind it, and tried running them.

Results - not good.  The other two cars have truck-mounted Kato couplers.  I didn't have any unwanted uncoupling incidents, everything stayed together fine.

But, even on 18 inch radius curves, the trailing car derailed.  There simply isn't enough coupler swing for the body- and truck-mounted couplers to work together.

So, unless you want to body-mount a coupler on the trailing car, replace the coupler on the business car with a MT 1015 or 1016, or have very wide curves, I'd say it isn't going to work.
« Last Edit: November 11, 2026, 01:48:13 AM by nkalanaga »
N Kalanaga
Be well

Lemosteam

  • Crew
  • *
  • Posts: 6469
  • Gender: Male
  • PRR, The Standard Railroad of my World
  • Respect: +5029
Re: Kato Business Car - Replacement Coupler
« Reply #2 on: November 10, 2026, 03:33:14 PM »
+1
What if you were to attach an extended MT 1019 design like this, snip off the prong end and screw the extension to the bottom of the car a few millimeters ahead of the coupler and let the coupler swing under the car. To prevent the arm from drooping or being pushed down you could put a wire below and across into the floor to support the hanging coupler vertically.

« Last Edit: November 10, 2026, 03:36:24 PM by Lemosteam »
John "Lemosteam" LeMerise

NorsemanJack

  • Crew
  • *
  • Posts: 323
  • Respect: +49
Re: Kato Business Car - Replacement Coupler
« Reply #3 on: November 10, 2026, 08:30:31 PM »
+1
What is an OCS train?

fcnrwy23

  • Crew
  • *
  • Posts: 432
  • Home of the FCN
  • Respect: +618
Re: Kato Business Car - Replacement Coupler
« Reply #4 on: November 10, 2026, 10:59:45 PM »
+1
OCS - Office Car Special

Jerry

Angus Shops

  • Crew
  • *
  • Posts: 827
  • Respect: +292
Re: Kato Business Car - Replacement Coupler
« Reply #5 on: November 11, 2026, 07:02:47 PM »
0
OCS - Office Car Special

Jerry

Oh, I thought it On Company Service.