Author Topic: On30 Micro Tail-Chaser  (Read 166 times)

0 Members and 1 Guest are viewing this topic.

VonRyan

  • Crew
  • *
  • Posts: 3117
  • Gender: Male
  • Purveyors of Fine Esoterica
  • Respect: +714
On30 Micro Tail-Chaser
« on: November 04, 2026, 12:09:28 PM »
+3
Here’s the backstory:

I picked this up as a secondhand abandoned project at the 2024 Harrisburg Narrow O meet for $5. I figured the piece of ME flex that was on it, plus the lazy susan, and the special electrical connector that allows it to keep spinning made it all worth the $5 at least.

The original builder had planned to try to handlay two or three extremely tight curved turnouts to make this a bit of a switching puzzle, and had attempted it to some extent since there were some used PCB ties still glued down.

I contemplated doing that, just with dry spikes instead.
But, I sat it on a shelf in the back of the basement and carried on doing other things.

Fast forward to a few weeks ago and I found myself with the strong urge to build things. To actually do some modelling again.

I pulled this out and looked at it. Ditched the idea of doing sidings. Just wanted to build something for short wheelbase equipment to do laps on. Maybe some of the nifty Japanese etched brass kits if I get around to buying some.

I had decided to forgo handlaying in favor of just putting in another piece of flex just to get this thing “running” quickly.

But, then I had a tall rye and root beer and said screw it…

Off came the flex and out came the palm sander to smooth out all the remaining cork.

The next day, the committedness setting in, I started digging out my stash of old S-scale ties, precious Hunterline “driftwood” stain, and other supplies for dry-spike handlaying.

When I first was going to do something with this, I looked at buying a rail roller to pre-form the rails to make it easier, but the like $90 price tag from Fast Tracks said I should just try to do it another way, which is why it got shelved.

What I came up with this time is cutting out some of the ties from the removed flex track (since it’s weathered ME code 70 rail) and working the track into place and spiking it as I go, taking out more ties as I get more spikes in.

I only get about an hour at a time to work on things in the basement, so here’s where things are after last night:

[ Guests cannot view attachments ]


Progress will probably be slow once I get track laid and the idea I have for landforms roughed in.

I have a couple ideas for this layout so that it can be something more interesting than just a little tail-chaser, but those will come as time and budgets allow.
Cody W Fisher  —  Wandering soul from a bygone era.

Modeller in Z, Nn3, N, TT, On30

In Memoriam
Bill Kidd
Bill “Rep” Repholz
Erik Seidelmann

VonRyan

  • Crew
  • *
  • Posts: 3117
  • Gender: Male
  • Purveyors of Fine Esoterica
  • Respect: +714
Re: On30 Micro Tail-Chaser
« Reply #1 on: November 08, 2026, 04:52:01 AM »
0
Track is laid. The whole thing is nothing but wood ties and spikes. Only soldering was the joints from adding in another piece of flex.

[ Guests cannot view attachments ]

Of course it turns out that the flex that was originally on here is code 83, and all I have is code 70, so there’s a little bit of a transition, but nothing serious. And the rail joints will be hidden. One set in a tunnel, and the other with a grade crossing.

I also highly doubt I’ve managed to keep even some semblance of a consistent radius around this whole thing… but at least it looks cool?
Cody W Fisher  —  Wandering soul from a bygone era.

Modeller in Z, Nn3, N, TT, On30

In Memoriam
Bill Kidd
Bill “Rep” Repholz
Erik Seidelmann

VonRyan

  • Crew
  • *
  • Posts: 3117
  • Gender: Male
  • Purveyors of Fine Esoterica
  • Respect: +714
Re: On30 Micro Tail-Chaser
« Reply #2 on: November 08, 2026, 05:03:47 AM »
+2

Tested the track with my 0-4-2 porter since I have to reassemble and still paint the actual piece of rolling stock I plan to run on this layout. Even with how odd it looks on such a tight radius, it made for a good proof of concept so to speak.
Cody W Fisher  —  Wandering soul from a bygone era.

Modeller in Z, Nn3, N, TT, On30

In Memoriam
Bill Kidd
Bill “Rep” Repholz
Erik Seidelmann