Author Topic: T-Trak Improving my Southwestern T-TRAK module scenery  (Read 1417 times)

0 Members and 1 Guest are viewing this topic.

arbomambo

  • Crew
  • *
  • Posts: 1557
  • Respect: +1670
Re: Improving my Southwestern T-TRAK module scenery
« Reply #15 on: October 22, 2026, 03:51:14 PM »
+1
With the Arbo Canyon modules very close to being completed, work begins on the next Southwestern scenery modules, a pair of large radius corners.
These are beautiful modules from T-TRAK by Stuart Denniston; a perfect canvas from which to start.







"STILL Thrilled to be in N scale!"

Bruce M. Arbo
CATT- Coastal Alabama T-TRAK
https://nationalt-traklayout.com/


Ed Kapuscinski

  • Global Moderator
  • Crew
  • *
  • Posts: 26169
  • Head Kino
  • Respect: +11710
    • Conrail 1285
Re: Improving my Southwestern T-TRAK module scenery
« Reply #16 on: October 22, 2026, 04:10:41 PM »
0
What track is that Bruce?

Dave V

  • Crew
  • *
  • Posts: 12424
  • Gender: Male
  • Foothills Farm Studios -- Dave's Model Railroading
  • Respect: +12072
Re: Improving my Southwestern T-TRAK module scenery
« Reply #17 on: October 22, 2026, 04:18:14 PM »
0
What track is that Bruce?

Looks like painted Kato concrete tie... and more patience than I have left!

dem34

  • Crew
  • *
  • Posts: 1901
  • Gender: Male
  • Only here to learn through Osmosis
  • Respect: +1457
Re: Improving my Southwestern T-TRAK module scenery
« Reply #18 on: October 22, 2026, 05:39:04 PM »
0
Yeah I keep trying to do the whole paint the ties thing on concrete track and always give up after the 5th time getting the brown on the ballast.
-Al

arbomambo

  • Crew
  • *
  • Posts: 1557
  • Respect: +1670
Re: Improving my Southwestern T-TRAK module scenery
« Reply #19 on: October 22, 2026, 07:32:52 PM »
+1
What track is that Bruce?

Kato 19”(?) concrete tie super-elevated track.
Ties were hand painted with a microbrush
"STILL Thrilled to be in N scale!"

Bruce M. Arbo
CATT- Coastal Alabama T-TRAK
https://nationalt-traklayout.com/


crrcoal

  • Crew
  • *
  • Posts: 674
  • Respect: +142
Re: Improving my Southwestern T-TRAK module scenery
« Reply #20 on: October 23, 2026, 04:31:06 PM »
0
Would it be easier to spray bomb the entire track, clean the rail head and call it a day? The roadbed would be covered by ballast anyway. Maybe if so inclined paint a few random ties here n there a grayish color?

pdx1955

  • Crew
  • *
  • Posts: 688
  • Gender: Male
  • Respect: +477
Re: Improving my Southwestern T-TRAK module scenery
« Reply #21 on: October 25, 2026, 04:42:17 PM »
0
Would it be easier to spray bomb the entire track, clean the rail head and call it a day? The roadbed would be covered by ballast anyway. Maybe if so inclined paint a few random ties here n there a grayish color?

That's what I'm doing on my modules- just painting the ties and rails like with flex track. This is important for me as I use a mix of Kato and Peco so everything ties together. Then everything gets ballast.
Peter

"No one ever died because of a bad question, but bad assumptions can kill"

Dave V

  • Crew
  • *
  • Posts: 12424
  • Gender: Male
  • Foothills Farm Studios -- Dave's Model Railroading
  • Respect: +12072
Re: Improving my Southwestern T-TRAK module scenery
« Reply #22 on: October 25, 2026, 05:28:46 PM »
0
So, that's been recommended more than once, but I wonder how many folks suggesting it have tried to actually ballast the Kato concrete tie track after spray painting.

The center of each tie--due to the prototypical taper of a concrete tie--is maybe one ballast grain thick.

Following @chicken45 's odyssey in ballasting Kato concrete-tie Unitrack was eventually instrumental in my choice not to do it. Not because his looked bad--far from it--but because given the choice between teasing individual ballast grains into the spaces between the near-zero relief ties and painting the same, the paint seemed the slightly lesser of two evils to me. To wit: https://www.therailwire.net/forum/index.php?topic=49374.msg662532#msg662532

If others have also done this successfully, please share some photos...I may reconsider my choice not to.
« Last Edit: October 25, 2026, 05:31:10 PM by Dave V »

chessie system fan

  • Crew
  • *
  • Posts: 1534
  • Gender: Male
  • Respect: +1402
Re: Improving my Southwestern T-TRAK module scenery
« Reply #23 on: October 25, 2026, 06:22:18 PM »
+1
When I did my T-TRAK module (admittedly with regular Unitrak), I painted the track with very dilute Tamiya brown paint in 99% IPA and discovered that the IPA partially stripped the black paint, showing the gray plastic underneath.  The weathered wood effect turned out well.  For the ballast, I used a fine brush and painted the areas around the ties with straight matte medium before sprinkling on the ballast.  A quick vacuum later and it was done.  No stray ballast specks that way.  That might still sound like too much work, but remember that the area between each tie is effectively a tub that holds water, so I didn't need to paint every nook.  The matte medium crept into all the corners on its own.

Aaron Bearden

Dave V

  • Crew
  • *
  • Posts: 12424
  • Gender: Male
  • Foothills Farm Studios -- Dave's Model Railroading
  • Respect: +12072
Re: Improving my Southwestern T-TRAK module scenery
« Reply #24 on: October 25, 2026, 06:34:32 PM »
0
When I did my T-TRAK module (admittedly with regular Unitrak), I painted the track with very dilute Tamiya brown paint in 99% IPA and discovered that the IPA partially stripped the black paint, showing the gray plastic underneath.  The weathered wood effect turned out well.  For the ballast, I used a fine brush and painted the areas around the ties with straight matte medium before sprinkling on the ballast.  A quick vacuum later and it was done.  No stray ballast specks that way.  That might still sound like too much work, but remember that the area between each tie is effectively a tub that holds water, so I didn't need to paint every nook.  The matte medium crept into all the corners on its own.



Yeah, not quite the same, good though that looks. I've also ballasted regular Unitrack between the ties. The concrete ties pose a significantly more tedious proposition both due to their thinner profile and the narrower (and more numerous) spaces between.

dem34

  • Crew
  • *
  • Posts: 1901
  • Gender: Male
  • Only here to learn through Osmosis
  • Respect: +1457
Re: Improving my Southwestern T-TRAK module scenery
« Reply #25 on: October 25, 2026, 11:47:36 PM »
0
This odyssey is why I decided to just roll my own Tie Beds. The prototype track spacing is one thing, but the main reason I did it was to make ballasting easier. (And because I seem to just passively accumulate a lot of Code 80 track)
-Al

arbomambo

  • Crew
  • *
  • Posts: 1557
  • Respect: +1670
Re: Improving my Southwestern T-TRAK module scenery
« Reply #26 on: October 29, 2026, 12:43:16 PM »
+1
While waiting for more chipboard (for roads) for the two large radius corner T-TRAK modules, I began work on one of the 3 doubles that will form the ATSF station and freight house for the fictional town of “Prieta”.
These modules will feature a small Southwestern Mission-style depot with freight house, a team track, and small town elevator.
I’ll also use these modules to bend the “Mother Road” a bit before curving back under the tracks as an underpass and off the front of the western-most module.
Here is the start of first module, the eastern-most of the three doubles. I used a Kato No.6 on the main (the recommendation if using Unitrack turnouts), and added three more yellow line power drops, in order to power the entire yellow line and team track spur, regardless of which route the switch is thrown.
Also, to fit the no 6 turnout AND maintain the necessary 1-2mm overhang for all tracks on the ends of the modules, I had to cut a couple of pieces of Unitrack to custom lengths.
Can you spot the custom cut pieces?







"STILL Thrilled to be in N scale!"

Bruce M. Arbo
CATT- Coastal Alabama T-TRAK
https://nationalt-traklayout.com/


Mark5

  • Crew
  • *
  • Posts: 11904
  • Always with the negative waves Moriarty ...
  • Respect: +957
Re: Improving my Southwestern T-TRAK module scenery
« Reply #27 on: October 29, 2026, 03:36:08 PM »
0


I'm really loving your scenic work here - time for me to take another cross country jaunt! 8)


crrcoal

  • Crew
  • *
  • Posts: 674
  • Respect: +142
Re: Improving my Southwestern T-TRAK module scenery
« Reply #28 on: October 30, 2026, 01:45:54 PM »
0
What ballast is that? WS or something else?


When I did my T-TRAK module (admittedly with regular Unitrak), I painted the track with very dilute Tamiya brown paint in 99% IPA and discovered that the IPA partially stripped the black paint, showing the gray plastic underneath.  The weathered wood effect turned out well.  For the ballast, I used a fine brush and painted the areas around the ties with straight matte medium before sprinkling on the ballast.  A quick vacuum later and it was done.  No stray ballast specks that way.  That might still sound like too much work, but remember that the area between each tie is effectively a tub that holds water, so I didn't need to paint every nook.  The matte medium crept into all the corners on its own.



chessie system fan

  • Crew
  • *
  • Posts: 1534
  • Gender: Male
  • Respect: +1402
Re: Improving my Southwestern T-TRAK module scenery
« Reply #29 on: November 08, 2026, 06:48:03 PM »
+1
@crrcoal , it's simply WS gray fine ballast.  I chose that for easy consistency with future modules.  I also strained out the larger lumps.
Aaron Bearden